Jump to content

Giffo

MEMBER
  • Posts

    30
  • Joined

  • Last visited

Posts posted by Giffo

  1. hey

    I agree with damos grays point is a better boat ramp to launch from.  try pumping nippers at the grays point sand flats there is heaps there and fish the incoming tide with nippers floated down current (works for me) if that doesn't work lots of action around Lilli Pilli sand flats and south west arm. you might need to ask a boat for a tow as it is a trek on the kayak.

    good luck

     

  2. 19 hours ago, Berleyguts said:

    Interesting! I’d have thought that the motor running in shallow water would scare the crap out of the fish! I could understand moving over the flats with the oars or an electric motor...

     An electric motor or a strong drift will work as well. Our boat has a 3.5 HP and it is very quiet.

    • Like 1
  3. My local sand flat in Grays Point is known to hold lots of whiting but after numerous sessions pumping nippers and trying to get a feed of whiting,  instead having  very sore arms after each session. I have been trying to catch whiting on this very flat for 10 years. The day had finally come when I found out how to catch these whiting. When my son came home with 8 whiting between 30 and 35 cm.  I had to tag along the next session to see how he did it.  I was bemused when he said that he left the motor in gear  the whole time. He was trolling for whiting!!!. he says the moving nipper along the flats targets the bigger fish. before we knew it he had beaten his personal best whiting and pulled one in the net measuring 42 cm. along with 5 of his mates. none of which were undersize.  A prolific tactic used in deep sea fishing can be used to good effect in 1 metre of water.   

    • Like 4
    • Thanks 1
    • Haha 1
  4. Wow what a beautiful photo! Please tell me that was with a proper camera and not a phone. I was down there around the same time. My young bloke caught two 30cm flatties in the river on squidgy prawns. I got nought. Fished in the bay and didn't get a touch. If it wasn't such a great place I would have had the shits!

  5. Been fishing the Hacking for around 40 years. Never seen one of these before, let alone caught one. I have seen posts of Raiders who have got the in the Hacking.  So you can imagine my excitement (read jealousy) when my 16 year old pride and joy fronts up with this. On a plastic adds to my pain. 33cm on the tape. I’m guessing the fresh has brought them down from Audley. The thrilled look on his face did ease my pain. 

    AD9D46A5-2821-4481-B037-599D195389E4.jpeg

  6. Nice work Hawkesbass. I've being doing a bit of blacky fishing in the hacking. Caught a few and took a few home for a feed. I found them them a bit weedy to taste. I did bleed, fillet and skin them. I thought it might be because they were caught a bit up stream. Can you pass on any tips for preparing them for the plate? Thanks.

  7. RichieR, the bigger ones I cut into smaller pieces and make sure the barb comes out one of the leg holes. Smaller ones can go on whole, put the hook up underneath and out through the top. The shell is pretty thin and it's pretty easy to push it through. I use 2/0 or 3/0 bait keeper hooks and the work fine.

  8. Hi all, I had a rather 'shocking' experience on the water last weekend.

    I took the boat out on Sunday. The motor, a 1977 Javlin 85hp started and ran fine, until I went to turn it off. When I turned the ignition switch off, the motor continued to run. After playing around with the key it eventually stopped, after about a minute or so.

    The next couple of times I did this there was no problem, then it happened again. This time I received a decent electrical shock when I touched the control box. The electrical shock problem only happened when the motor was running and the ignition swithched into the off position. It did not occur during the normal running of the motor.

    My guess is there may be a loose wire/conection in the ignition switch, however I'm wondering how this may have occured.Or could the issue be a loose wire/connection in the motor's electrical system itself.

    I would appreciated any suggestions as to what may be causing this problem.

    Regards

    Giffo

×
×
  • Create New...