pugzthugz
-
Posts
51 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Fishing Tips, Advice and Articles
Blogs
Store
Posts posted by pugzthugz
-
-
16 minutes ago, Rebel said:
Hi,
Buy an 80lb. Will solve all your problems.
How much would an 80lb cost? thx for the reply
-
15 minutes ago, flatheadluke said:
I’d guess 4 knots with one (walking pace) and 8 knots with two.
Cant say I’ve seen a dual electric set up, it sounds pretty awesome.
the electrics are a lot quieter but do still spook the fish, can i ask why not look at a double kayak instead?
We do have and use kayaks, however, we also want a way of moving us and our gear to low access landbased spots to add a bit of flexibility to some shark fishing. Thx for the reply
-
Me and some mate are going to buy an 11ft tinny for some inshore fishing catching anything from bread and butter species to small game. How fast would we move with an electric motor with 44lbs of thrust? How much faster would we move with two of those?
Cheers - Pugz
-
thx guys
-
1
-
-
Has anybody cuaght any bullies from the parra river system, what set up/ tackle/ bait were u using?
cheers - pugz
-
3 hours ago, ARC H said:
Sharks arent so fussy when it comes to freshness of bait. Buy Bonito or mullet from the bait shop. 👍
ye, its just i catch a lot of shovel - noses as by-catch anyway
-
13 minutes ago, kingie chaser said:
Best to check the nsw dpi size & bag limit guide whick you can just google
I don't see shovelnose on here, does that mean it is takeable?
-
In NSW can I keep a shovelnose shark to eat or as bait? Is there a legal length?
Cheers - Pugz
-
Hey guys, been playing with the idea of doing some shark beach fishing, however, I haven't yet because I have struggled to find bait big enough for sharks. I know salmon are good for sharks but where I am we don't catch many of those. What we do catch a lot of is shovelnose sharks. Are these a protected species in nsw? has anybody tryed using them as bait? Pls let me now.
cheers - pugz
/
-
Hello, do surf poppers work in sheltered beaches - such as Clontarf beach in Middle Harbour - which have minimal wave action, however, still have current?
Cheers - Pugz
-
4 hours ago, Hateanchors said:
I see. So because that disc was sticking up, it made the spool sit a little higher than it should?
Sounds like those discs were not put together carefully enough causing that bit to bend.
exactly
-
Just now, pugzthugz said:
Update: I fixed it. Part 117 has 2 little bits of metal that
hold it in place with a similar looking gold plate. These were bent out of place. I just made them straight again with pliers which allowed the line spool to sit deeper into the reel. This prevented friction from the spool moving my drag, so now the reel is fixed. Thanks for the help Hateanchors and Rickmarlin.
Cheers -pugz
This ^ is a really helpful website for reel schematics.
-
Update: I fixed it. Part 117 has 2 little bits of metal that
hold it in place with a similar looking gold plate. These were bent out of place. I just made them straight again with pliers which allowed the line spool to sit deeper into the reel. This prevented friction from the spool moving my drag, so now the reel is fixed. Thanks for the help Hateanchors and Rickmarlin.
Cheers -pugz
-
1
-
-
I recently bought a Penn 950 SSM. I used it for one session on the beach at night and one in early morning. Towards the end of the second session, the drag started to tighten itself when I pulled line out of it which then made it harder to pull line out until eventually, it was impossible to take line. I have absolutely no idea why it is doing this, as I haven't taken the reel apart except for when I put the line spool into hot water after I put line onto it. I am pretty confident I didn't lose any parts while doing this. I thought maybe it had a bit of sand stuck in it so I took the line spool of and cleaned/ oiled the reel. This didn't help. How should I fix this?
-
On 12/26/2018 at 10:42 AM, PaddyT said:
Around there-ray or shovelnose
Maybe but we'd caught a couple of those and this fought way harder than the ones we'd got
-
4 minutes ago, anthman said:
Get some PVC tubes to stand up your rods in the sand! It was painful to imagine the reels scraping through the sand and into saltwater!
With that out of the way, some extra info will be helpful to see what the situation was:
* what drag did you have on?
* Braid or mono? What LB test line are they?
Could've been kingfish, could've been salmon as well.
My advice would be to change the drag accordingly throughout the fight - you have circle hooks on so you probably won't have them slipping off the hook (But as you said, can be pulled off the hook with too much pressure).
Loose to medium drag when *sitting in the rod holders* - circle hooks will need to gradually load up to allow time for the hook to find the corner of the mouth. If the fish is not heading to rough terrain, I would just take my time - enough drag that the fish, if sizable, can go for a run or two and it should be able to pull some drag. Careful on the waves.
If the fish is heading to rough terrain, up the drag and fight a bit more aggressively - not full blast, but if it's getting close you either hope for the best and play it out or risk pulling a hook and skulldrag it out with max drag that your line and rod can handle. If you start feeling grinding against the rocks on your line, then dont max drag, you'll have to play it out carefully - maybe open the bail if it feels like the fish has wrapped something in the hope that if clears the structure.
Good luck!
Thanks for the advice.
We did have PVC rod holders, however, I don't think we put them in far enough. Do you normally dig a hole and pack them in?
I had low drag on, however, when I saw how much line the fish was taking I put it up because I thought the fish was going to spool me. Looking back on it I probably had 90 percent of my line so there was no point.
And again, thanks for the advice
-
What do you guys think is more important; fishing at the right time or fishing the right tide?
-
Hey everyone, just recently me and a mate went fishing at a beach in Mosman, whilst we didn't catch many fish it was a great day. So we aren't very experienced at fishing from a beach of any manner, we have tried surf beaches before with no success, so you can see why the day before when we were planning this trip we were doubtful about how this expedition was going to unfold.
We decided that if we were going to catch fish we must wake up early so as planned, the next day our alarm went off at 5 am. We tiredly gathered our stuff and made our way to the relatively calm beach. It was a horrible journey with 4 rod-holders and rods, backpacks, bait, footys, etc, however, when we eventually got there we were greeted by a nice fresh day and a sunrise that was - whilst slightly obscured by clouds - quite a spectacle. We quickly and eagerly unloaded, rigged, baited and our rods. We had one legitimate beach rod which we loaded up with a paternoster rig and 3 small 2-4kg estuary rods which we loaded with size 4/0 Mustad circle hooks and running sinkers. We were using servo pilchards which I whole-heartedly mistrust.
The first half hour was very slow fishing full of what were either very small nibbles or the swell. Another fisherman set up a little way down the beach, he said that he'd caught a few shovel-nose sharks around about where we were. Just five minutes after talking with him my mate was onto a fish, not surprisingly it was a shovelnose, it had swallowed the hook so we cut the line before letting it go. Not long after - when the tide was approaching high - I saw my rod get pulled out of the rod holder and into the wash zone. I sprinted over and picked the rod up, full of adrenaline I rushed the fight causing the hook to pull. I was very disappointed. While I was rebaiting I looked around and saw my mate's rod being pulled down the beach. He ran over to it and similarly to me rushed the fight and dropped the fish. Before he could have time to rant about dropping the fish I saw my rod being pulled in. This time I took my time fighting the fish and safely landed it. It was a 39cm silver trevally, we had forgotten our phones so we couldn't get a photo. We let this fish go. Just after my mate missed a fish I saw my big rod being pulled into the water with amazing pace, I ran and picked it up. Whatever was on the end was fighting very hard. The drag was screaming. It ran straight for the rocks and after a stressful minute, I heard the dreaded twang of it busting me off on the rocks. We both missed another fish before the bite slowed down. We packed up and headed home feeling both content at our progress into the art of beach fishing and annoyed at passing up so many opportunities of fish.
Any advice is much appreciated, we are learning. What fish do you reckon I had? I think it was a kingfish (they are common around this area). Is the bait ok? What is more important tide or time? What tide is best?
Cheers - Pugz
-
Great tips, is this applicable to hardbody lures? If so, what type would you recommend?
-
13 minutes ago, masterfisho7 said:
A shark about 3 hours when I was a lot younger and fitter
Wow great catch mate
-
What's the hardest/ longest fight against a fish you've had?
-
Hey everyone, I'm looking to get into the beach shark fishing scene and I would like to use an Alvey reel. Are Alvey reels adequate for fighting such powerful fish? Is there a steep learning curve? Would a second hand $20 Alvey of gumtree still work well enough to catch sharks? Would this reel be more suitable for catching sharks https://www.fishingtackleshop.com.au/rovex-endurance-reels.html? Please let me know. Cheers?.
-
7 hours ago, dirvin21 said:
how big are the sharks you intend chasing? You generally don't need a particularly heavy mainline for sharks just a long heavier leader to prevent bustoffs from rubbing on the sharks body
I'm going for sharks on the smaller side perhaps a metre or under, however, I can't control if a big shark comes along.
-
4 minutes ago, geshy said:
Iv caught sharks with that exact rod.. only bronzies around the metre mark though had no worries with them
Awesome, what capacity line and what rigs do you normally use?
Dual electric outboards
in Fishing Chat
Posted
We would rather not use a petrol motor because of the costs of gas, we would rather get to places more slowly for cheaper. Thx for reply