Laurie stageman
-
Posts
4 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Fishing Tips, Advice and Articles
Blogs
Store
Posts posted by Laurie stageman
-
-
On 4/28/2020 at 6:27 PM, tryhard said:
Could be a Trim Master setup - I am just guessing.
Trim Master went out of business quite a few years ago.
You could try contacting International Marine in VIC.
They might be able to tell you what the standard fitment was when the boat was built....I have had mixed success finding info on Bertie's and Caribbean's over the last couple of years.
You could also try one of the American boating forums, there is a bigger brains trust available in the US by virtue of their population no's.
Grab a couple of photos to put up too. That sometimes helps!
Good luck.
Thanks Tryhard
Appreciate it cheers
On 4/28/2020 at 3:49 PM, Laurie stageman said:Good afternoon all im a newby i have a queztion in regRds to boats does anyone know the name of the old style trim tabs that were found on the older bertram 30 cabins these actuators are hydraulic made out of copper tubing with a brass plunger with o rings the tab is stainless i had them on my old 16 foot and now have them on the 18 foot when i got them they came with two mechanical winders to lower and raise them i fitted an insta trim pump to them
Im trying to find out the name of them and if there are some still about cheers laurie
Plunget
-
Hi mate i had same troble i have a 78 masrm half cabin 18 foot it is a heavy boat i put a 130 evinrude on it 98 model i got for 2k 500 hrs on it i changed the prop from a 17 three blade to a 17 4 blade a lot bettet on fuel 4 thousand revs im on the plane doing 42klm it may work for you too
- 2
-
Good afternoon all im a newby i have a queztion in regRds to boats does anyone know the name of the old style trim tabs that were found on the older bertram 30 cabins these actuators are hydraulic made out of copper tubing with a brass plunger with o rings the tab is stainless i had them on my old 16 foot and now have them on the 18 foot when i got them they came with two mechanical winders to lower and raise them i fitted an insta trim pump to them
Im trying to find out the name of them and if there are some still about cheers laurie
Plunget
Best paint for fibreglass
in Boating
Posted
Hi all has anyone ever used epoxy metal paint on there fibreglass boat i have a project boat which im repainting and thi king off useing that paint i have done a test paint on a peice and seems to bond fairly well had it in a bucket of salty water for a month and still tough and shiny and thought i would get some thoughts cheers