hargrooves Posted April 23, 2009 Share Posted April 23, 2009 (edited) Just bought a set of docking lights for my Bar crusher. I was just wondering if anybody out there that owns a Bar crusher has done the same. I'm at a lose to were i shall mount them. If anybody has any ideas or a photo or two on were they mounted there's would much appreciated. Edited April 23, 2009 by Reel Screama Link to comment Share on other sites More sharing options...
BalmainBob Posted April 23, 2009 Share Posted April 23, 2009 (edited) Gday Mate, I mounted a set of lights to the roof of my 530 as you can see in the picture below. I mounted them to the bolts that hole the black poles thathold the roof in placel that way i did not have to drill any new holes. I then ran the wires in a a conduit across the roof and then run the wires down the centre of the pole and then to a switch on the dash board. The lights wereable to be easily turned and in whatever direction I wanted. They served as docking and deck lights. Hope this helps. Cheers Bob Edited April 23, 2009 by BalmainBob Link to comment Share on other sites More sharing options...
WANNAFISH Posted April 23, 2009 Share Posted April 23, 2009 I hope this one would give you an idea: I wish this was my beast! Link to comment Share on other sites More sharing options...
Mik Posted April 23, 2009 Share Posted April 23, 2009 (edited) I mounted mine on Pog atop the rocket launcher. I find it great because I can rotate them practically 360 degree & use them for docking, deck flood lights or spotties in unfamiliar waters. I also made sure I can switch them individually. PS I realise Pog isn't a Bar Crusher (Quinne Offshore) but if you have something similar by way of launchers then there is another possibility. Edited April 23, 2009 by Boofhead Link to comment Share on other sites More sharing options...
hargrooves Posted April 23, 2009 Author Share Posted April 23, 2009 Gday Mate, I mounted a set of lights to the roof of my 530 as you can see in the picture below. I mounted them to the bolts that hole the black poles thathold the roof in placel that way i did not have to drill any new holes. I then ran the wires in a a conduit across the roof and then run the wires down the centre of the pole and then to a switch on the dash board. The lights wereable to be easily turned and in whatever direction I wanted. They served as docking and deck lights. Hope this helps. Cheers Bob Thanks BalmainBob mounted them tonight didn't wired them yet , do they hinder you when you are driving the boat in heavy seas at all. Link to comment Share on other sites More sharing options...
BalmainBob Posted April 23, 2009 Share Posted April 23, 2009 GDday Mate, Unfortunaltey I do not own the boat anymore but when I did they did not cause me any problem,. Im only 178cm (5'10) tall maybe if I was taller they might have. Also I disconnected the cabin light and used that switch on the panel to work these lights. Cheers Bob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now