Lowrance 525lms

[rizzo]

Hi there Raiders i need some technical advice please on my

sounder i have a Lowrance 525lms Gps combo and im trying

to get it to show arches for indicating fish instead of fish symbols

or hazes on the screen. I can not seem to find it in the menu can

anyone out there please help out if they know this unit.

Cheers Rizzo

Edited August 27, 2009 by rizzo

[Rich P]

Rizzo

From memory and not looking at my lowrance i think you have to push menu while on the sonar screen then sonar set up or features and turn off fish ID.

If no one else knows i will check tomorrow for you.

Rich

Edited August 27, 2009 by Rich P

[mrsswordfisherman]

Hi rizzo

Try getting the sensitivity screen up and selecting Sonar Features.

On this screen you should find FISH ID. There are 2 boxes fish symbols and fish depths. Ensure that neither are selected and you should see arches displayed

Have a look at this link to download the emulator for your sounder. I learned to work ours from there before we even had the unit!

http://www.lowrance.com/en/Downloads/Product-Emulators/

Hope this helps

mrsswordfisherman

[rizzo]

Hi rizzo

Try getting the sensitivity screen up and selecting Sonar Features.

On this screen you should find FISH ID. There are 2 boxes fish symbols and fish depths. Ensure that neither are selected and you should see arches displayed

Have a look at this link to download the emulator for your sounder. I learned to work ours from there before we even had the unit!

http://www.lowrance.com/en/Downloads/Product-Emulators/

Hope this helps

mrsswordfisherman

Thank you Donna i'll give it a try and the emulators should be a big help

Cheers Rizzo

Rizzo

From memory and not looking at my lowrance i think you have to push menu while on the sonar screen then sonar set up or features and turn off fish ID.

If no one else knows i will check tomorrow for you.

Rich

Thanks Rich i'll keep cracking at it and i'll let you know

how i go.

Rizzo

[Rich P]

Rizzo

If you do what i have explained it will go away. I have just checked my unit and i was correct.Have the screen on sonar then tap menu once. Go to sonar features then on the far right of your screen you will have the fish id take the 2 ticks from fish symbols and fish depths away and you should then see arches or fish line on your screen.

Donna

The screen you mentioned is the menu screen where the sensitivity is at the top.

Cheers

Rich

[mrsswordfisherman]

Rizzo

If you do what i have explained it will go away. I have just checked my unit and i was correct.Have the screen on sonar then tap menu once. Go to sonar features then on the far right of your screen you will have the fish id take the 2 ticks from fish symbols and fish depths away and you should then see arches or fish line on your screen.

Donna

The screen you mentioned is the menu screen where the sensitivity is at the top.

Cheers

Rich

And here is a screenshot of that screen I mentioned where you will find the FISH ID selections. This is on the x135 but the operations should be somewhat similar.

Menu ---- nav key down ---- sonar features ----- ent --- nav key right ---- unselect fish symbols ent ---- exit

I am sure that you will figure it out from these descriptions from Rich and myself