Jump to content

Slow Day In Georges River


Recommended Posts

Bassboy888 and I headed out pre-dawn to Woolooware Bay for a surface bream session amongst the Oyster leases. Unfortunately the SE was blowing a gale along the bay. The chop and the fact we could not hold in a good position with the Minn Kota meant we had to find alternate options :1badmood: . After trying some sheltered oyster leases for nothing but scores of small tailor we decided to try for flatties and bream in the Georges River and Woronora River on the tide change and run out. The strong wind meant no finesse lures and we used MF40s and SPs. Despite plenty of small flatties, tailor and 1 x bream we only caught one keeper. This 50cm Flattie was caught on a green MF40 on a drop off in 8 feet of water and released to grow into a bigger model.

post-12960-126846878309_thumb.jpg

It was a hard and sometimes wet and cool day out there today.....hopefully next weekend will be calmer and warmer

Link to comment
Share on other sites

Still a great effort! and man i wish i had a boat like guys

I always thought the mf40 were a little too heavy i might have to look and see if they have lighter ones

Pete

The MF40 comes in a couple of sizes and are useful during high wind situations or when there are lots of choppy tailor attacking your plastics. We have had great success with them on the flats chasing lizards. The MF40 we mainly use is the 5.9gram watermelon pearl.

Link to comment
Share on other sites

Basscatcher - Interesting with the MF40s - have some in the tackle box but have hardly used them. Thought they were mainly for deeper water but you say you use them on the flats? What sort of retrieve? Slow lift and drop or an aggressive rip and drop?

Hope there's better weather this weekend - might see you on the water ...

Link to comment
Share on other sites

pmak, we vary our retrieves but the most successful technique has been a quick double lift and drop, then allowing the lure to sit for a couple of seconds. Most of the big lizards are taking the MF40 while it is sitting on the bottom and they takeoff just as you commence the next lift. This has been especially successful on the flats just short of a drop off or near weed. It appears they are attracted by the commotion of the quick lift and then attack the lure when it is stationary. Whereas the small choppy tailor attack the lure whilst it is in motion....and the strength of the MF40 (compared to a normal SP) is that the swarming Choppy Tailor don't do too much damage to the lure. Whereas, last weekend I lost the tail of over eight SP to the tailor, including a paddle tail from a 80mm SP Shad I was using to target larger lizards in 15 feet of water :ranting2:

We also use the same technique with metal blades on the flats, however as of late they have not been anywhere near as successful as the MF40s.

If the weather is good this coming weekend I am hoping to target the bream on the oyster leases in Woolooware Bay. I might see you there again.

Link to comment
Share on other sites

Have rarely used those lures , have half a dozen in the box , I will have to give them a bit more of a crack now you have got me keen to use em . Do you do any good on the bream with them ? or are they more of a flatty lure ?

Haven't been fishing in Botany many times but went about 3 weeks ago and had a ball , don't know the names of the places I fished but will get a map and learn a few of these spots .

If you see me out on the water come over and say g'day ive got a red skeeter with a white stripe on it and a white E-tec .

Bubba

Link to comment
Share on other sites

Basscatcher - thats for the low down on the MF40s. Will make more of an effort to use them next time I'm out. Don't get much of a vibration from them compared to the metal blades so I keep thinking that they're not working too well but have read elsewhere that they don't need to vibrate so much.

Good luck this weekend. May have to miss this weekend due to some commitments. Will have some northerly winds to deal with according to Seabreeze. Evenings are much cooler now too. Not much time left for the top waters? ....

Link to comment
Share on other sites

Have rarely used those lures , have half a dozen in the box , I will have to give them a bit more of a crack now you have got me keen to use em . Do you do any good on the bream with them ? or are they more of a flatty lure ?

Haven't been fishing in Botany many times but went about 3 weeks ago and had a ball , don't know the names of the places I fished but will get a map and learn a few of these spots .

If you see me out on the water come over and say g'day ive got a red skeeter with a white stripe on it and a white E-tec .

Bubba

Bubba - We have had great success using the MF40 when targeting Bream, however this has mainly been in deeper water (2 - 3 metres) near structure. My largest Bream in the Georges River (41cm) fell victim to a green MF40 cast alongside a pontoon in mid winter.

If I see you I will come over and say g'day.

Basscatcher - thats for the low down on the MF40s. Will make more of an effort to use them next time I'm out. Don't get much of a vibration from them compared to the metal blades so I keep thinking that they're not working too well but have read elsewhere that they don't need to vibrate so much.

Good luck this weekend. May have to miss this weekend due to some commitments. Will have some northerly winds to deal with according to Seabreeze. Evenings are much cooler now too. Not much time left for the top waters? ....

pmak - I haven't had much luck with the wind of late and I reckon we have only a couple of weeks of topwater breaming left. If it is too windy I will switch to targeting lizards along the flats.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...