Fishing_Maniac Posted June 19, 2015 Posted June 19, 2015 Hi everyone, I am planning to target kingfish land based this upcoming summer off wharfs in the harbour. The shimano baitrunner oc seems like a reel which would do the job. My question is, are baitrunners really worth it? Will kings spit out a live bait if they feel the resistance of a normal reel? Cheers, James
Welster Posted June 19, 2015 Posted June 19, 2015 (edited) I don't do much land based fishing. The benefit of the bait runner is the two drag systems. With the bait runner drag you can feed the line out on a light setting as your float or balloon drifts out or drifting a bait in the burley trail. Instead of free spooling. If a fish hits your bait turn the handle full drag kicks in straight away. So I think it's more suited to that style of fishing. I don't think you need to let kings run with the bait at all. The same probably goes for blackfish. Purists with centerpins please don't attack me! Just note the bait runner will be heavier than other similar reels. Edited June 19, 2015 by welst
Crossfire63 Posted June 19, 2015 Posted June 19, 2015 (edited) Use circle hooks and you don't need to let them run at all or strike . Just apply a little pressure and they'll hook themselves. Having said that Im old school. Having pulled over 100 bait runners apart for various people I'd rather use a small overhead reel or large baitcaster for livebaiting. Far less complicated, especially a LD model, I like to keep things simple Edited June 19, 2015 by Crossfire63
brickman Posted June 19, 2015 Posted June 19, 2015 baitrunners are very handy for downrigging and fishing for jews but as said i would use circle hooks for kings and hang on tight cheers gary
Guest no one Posted June 20, 2015 Posted June 20, 2015 Bait runner spin reels (in my opinion) are the best reels around. Good for trolling, down rigging, bait fishing, casting... The list goes on!
Piss'n'Broke Posted June 20, 2015 Posted June 20, 2015 Bait runner spin reels (in my opinion) are the best reels around. Good for trolling, down rigging, bait fishing, casting... The list goes on! tef1on is spot on here. We have over half a dozen 4500's B's. They are pretty much a bullet proof reel. And quite often a king, Jew, amber, Samson you name it will struggle swallowing a livey. This is where a btr comes into its own verse a conventional reel. Just wait til the btr mode kicks in and your losing line then strike. Doing this with a conventional reel can result in pull hook's and liveys being torn from your hooks. Just our 2 cents.
Guest no one Posted June 20, 2015 Posted June 20, 2015 I think they are probably the most versatile all round reel you can find. Not many other reels are at the top of their game for so many different types of fishing! I've used mine for successfully trolling for tuna one day to bottom bashing for snapper the next, to surf casting the next. And only had to adjust the BTR drag each time while having my main drag set at a constant.
Fishing_Maniac Posted June 20, 2015 Author Posted June 20, 2015 I think they are probably the most versatile all round reel you can find. Not many other reels are at the top of their game for so many different types of fishing! I've used mine for successfully trolling for tuna one day to bottom bashing for snapper the next, to surf casting the next. And only had to adjust the BTR drag each time while having my main drag set at a constant. Does the drag ever have to be adjusted internally mate? Sent from my iPhone using Tapatalk
Guest no one Posted June 20, 2015 Posted June 20, 2015 They have 2 drag settings, one for mainline drag when the reels locked which is in the normal drag spot on a reel at the top, and one for freespool drag, which is under the lever at the bottom. They're very easy to use!
krause Posted June 21, 2015 Posted June 21, 2015 I dont know about past models, but on the OC's the second drag can be varied just like the main drag. There is a dial that lets you vary it between virtually no drag (no recommended as the world gets tangled) and quite a reasonable pressure ( which I use on the beach, as its enough drag to set a hook, but not so much that the whole rod ends up in the water). Buy it, its worth it, even just as a good spin reel. I love mine
Fishing_Maniac Posted June 21, 2015 Author Posted June 21, 2015 I dont know about past models, but on the OC's the second drag can be varied just like the main drag. There is a dial that lets you vary it between virtually no drag (no recommended as the world gets tangled) and quite a reasonable pressure ( which I use on the beach, as its enough drag to set a hook, but not so much that the whole rod ends up in the water). Buy it, its worth it, even just as a good spin reel. I love mine Hi mate, is your OC coping with the spray from the beach?I have heard that another alternative is the penn spin fisher v for beach fishing since these reels are fully sealed. Sent from my iPhone using Tapatalk
krause Posted June 21, 2015 Posted June 21, 2015 Mine gets dunked, wet, sandy etc, the whole lot. And all despite my best efforts to keep it in good nick. Havent had an issue with it, love it off the beach, so much so my mate bought one as well. Its like any other sub-quality reel, look after it and service it a bit and itll last longer than you will. Or you can buy a gold plated, chemically inert, fully sealed, 48 bearing beast for the price of a small morgage and not have to take care of it. Just a matter of how much $$$ you want to spend. I will admit that after not washing the salt off of it and leaving it sit for a month did make the drag switch a little stiff, but a little grease and tlc and its back running smooth. Youre overthinking it. Buy the damn thing Cheers
Fishing_Maniac Posted June 21, 2015 Author Posted June 21, 2015 Mine gets dunked, wet, sandy etc, the whole lot. And all despite my best efforts to keep it in good nick. Havent had an issue with it, love it off the beach, so much so my mate bought one as well. Its like any other sub-quality reel, look after it and service it a bit and itll last longer than you will. Or you can buy a gold plated, chemically inert, fully sealed, 48 bearing beast for the price of a small morgage and not have to take care of it. Just a matter of how much $$$ you want to spend. I will admit that after not washing the salt off of it and leaving it sit for a month did make the drag switch a little stiff, but a little grease and tlc and its back running smooth. Youre overthinking it. Buy the damn thing Cheers You're right, I'll get it! What line class do you have yours paired with? Sent from my iPhone using Tapatalk
krause Posted June 21, 2015 Posted June 21, 2015 I run 30lb braid, for a little abrassion resistance of the rocks Sent from my SM-G920I using Tapatalk
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now