Halibut man Posted September 5, 2020 Share Posted September 5, 2020 Not much support from Lowrange. Have problem with Chart setting, a thick blue line appear on my trail each time I go out fishing. Not just a simple thin line for trail but a much thicker blue line (like a thick marker in dark blue)follows the 'triangle' icon of the boat. Anyone has the same problem? Advise ,Please share. Thanks Link to comment Share on other sites More sharing options...
kingie chaser Posted September 5, 2020 Share Posted September 5, 2020 Have a look in your manual. You would most likely be able to change the thickness & the colour. You would go into settings & either under Charts, waypoints or navigation settings you would be able to change it. Link to comment Share on other sites More sharing options...
kingie chaser Posted September 5, 2020 Share Posted September 5, 2020 (edited) Also in your manual under Basic operations there is point 21 "using the cursor" which could also explain where to change the cursor settings. if you dont have the manual download it here- https://www.google.com/search?sxsrf=ALeKk03LrEUkH1Ko68w1kb38UHR4dqhuRg%3A1599344923957&source=hp&ei=GxFUX-W7OMbH4-EPnMS28AU&q=lowrance+ti+7+manual&oq=lowrance+Ti7&gs_lcp=CgZwc3ktYWIQARgDMgQIABAKMgQIABAKMgQIABAKMgQIABAKMgQIABAKMggIABAWEAoQHjIICAAQFhAKEB4yCAgAEBYQChAeMggIABAWEAoQHjIICAAQFhAKEB46BQgAELEDOggIABCxAxCDAToICC4QxwEQowI6DgguELEDEIMBEMcBEKMCOggILhCxAxCDAToLCC4QsQMQxwEQowI6BAgjECc6BQgAEJECOgUILhCRAjoLCC4QsQMQgwEQkQI6AggAOggIABCxAxCRAjoFCC4QsQNQ7bYcWKf8HGDVkh1oAHAAeACAAZ0CiAGCEpIBBTAuOC40mAEAoAEBqgEHZ3dzLXdpeg&sclient=psy-ab Edited September 5, 2020 by kingie chaser Link to comment Share on other sites More sharing options...
Halibut man Posted September 6, 2020 Author Share Posted September 6, 2020 Langie Chase, thanks for the link mate. Will read the manual n try to reset. Will post result later. Cheese. Link to comment Share on other sites More sharing options...
JonD Posted September 6, 2020 Share Posted September 6, 2020 Could be a couple of things. One month got be that your track line is set to temperature graph line or it might be layering sidescan onto the chart page. If you set your tracks as black in colour and still have a blue line showing, then it's highly likely it's one of the two mentioned above, which can easily be turned off. Ive never had a track line represent as a thick line, don't think these can be adjusted. Link to comment Share on other sites More sharing options...
frankS Posted September 6, 2020 Share Posted September 6, 2020 My guess as to why they are not responding to you with your request is. IF you have addressed your questions with the same spelling as you addressed your title here , they probably think you are having a go at them and therefor a waste of time in responding. It's LOWRANCE not LOW RANGE. Frank Link to comment Share on other sites More sharing options...
Plumb Posted September 8, 2020 Share Posted September 8, 2020 Had this on mine, it’s a setting under the cursor options. I can’t recall exactly now but I’ll turn it on tomorrow and find it Link to comment Share on other sites More sharing options...
Halibut man Posted September 21, 2020 Author Share Posted September 21, 2020 Hi Frank S, I spelled it correctly Lowrange, where did you see Low Range? Link to comment Share on other sites More sharing options...
Halibut man Posted September 21, 2020 Author Share Posted September 21, 2020 Hi JohnD and Plumb. Thanks for the reply, will try to do as suggested and report back. Kingie Chaser, thanks for the manual link. Fiddle with some setting but still can get rid of the thick blue line. Last week I adjust the tracking line to other color but to no avail. Will try as suggested by JohnD and Plumb. Hope it works. Much appreciated. Link to comment Share on other sites More sharing options...
kingie chaser Posted September 21, 2020 Share Posted September 21, 2020 5 minutes ago, Halibut man said: Hi JohnD and Plumb. Thanks for the reply, will try to do as suggested and report back. Kingie Chaser, thanks for the manual link. Fiddle with some setting but still can get rid of the thick blue line. Last week I adjust the tracking line to other color but to no avail. Will try as suggested by JohnD and Plumb. Hope it works. Much appreciated. Personally I find these thing easier to deal with & work out when they are in my hands as even manuals can be confusing. If you need a hand I would be happy to try & help out in person. Northern beaches isn't to far from me & it might also give me a reason to drop in & see my nephew. Link to comment Share on other sites More sharing options...
Halibut man Posted September 30, 2020 Author Share Posted September 30, 2020 Hi KingieChaser, Thanks for the offer mate. Reset the Trail setting, somehow the thick blue line has disappeared 👏. Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now