-
Posts
51 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Fishing Tips, Advice and Articles
Blogs
Store
Posts posted by woy woy col
-
-
Sorry about the time getting back to you my intention is now to just have an alloy cover above the prop I cannot think of the correct name of this item but it controls cavitation and brings the boat up to the plane quicker. Top end speed is not all that important as l will be in a continuous sea swell in Broke Bay
I was told at the weekend that it's cheaper to replace a prop than a new drive sharf. What do you think..?
Thanks for your input
Regards Col
-
I have a 40 hp Yamha and thinking of going up to 50 hp
I have a 4.20 Renagaid has any one done this and is there much difference in performance thank you
Regards Col
-
On 9/2/2019 at 8:19 AM, frankS said:
They are 19.95 pound which is about $45 oz dollars so you are paying a bit for freight. Much better choices locally and as for rear drag reels I try to stay away from them. Had several in the past and none stood up to any sort of rough treatment, but this is just MY opinion.
PS I do like the little plastic indicator that plugs into the end of the spool that donates what line you have on it. But that's the only thing I like about them over any other cheap reel.
Frank
Thanks for your reply Frank I think I will get the small sharmo bait runner
woy woy col
-
On 9/2/2019 at 5:34 PM, TAZ said:
Hi Taz thanks for your reply, I am very interested in Shimano Exage 2500 RC do you use this reel for black fishing as well.
I have been using a small Penn 440ss matched with a CR 110 FT 4 rap. I have been using this rig for about 5 to six years prier to this I used centre pin reels with a BF 4 144 on the rocks but I gave the rock away getting to old that now I am in my seventies. Just out of interest the centre pin reel was made in the tool shop at the BHP in Newcastle in about 1965.
regards woy woy col
-
10 hours ago, Green Hornet said:
I watched a couple of utube clips on them but they didn't show too much.
What's the difference between them and an ordinary, rear drag spin reel?
Thanks for your reply GH I have just put in my reply to KB and like I said for $70 I may be the only kid of the block with a Red Drennan float reel.
woy woy col
-
Hi KB I have been using centre pin reels for years, about six years I started using a small rear drag spinning reel and this is the reason why.
On most reels have a catch on the skirt of the spool a lot of fishos think it’s just to stop the line from unravelling and it may well be, but when I want a short cast against structure I simply do a trial cast and then pull maybe a pull a metre extra line off the spool and clip it into that little plastic clip that way with a bit of practises you can drop your rig up against structure or such like
This is not my idea watched it on youtube under course fishing tect they have developed the reels for this purples and that the is reason why and besides I may well be the only kid on the bloke with a Drennan Red float reel.
woy woy col
-
Hi all
Could I get some information about Drennan Red Range float or feeder reels my thoughts are that I could use it for luddick fishing rather than a centre pin reel I may even use it for carp as well. I can get one from Great Britten for $70 aust derived
woy woy col
-
Hi all I have fished Brisbane Waters for the last 50 yrs. A lot of my fishing mates have passed on. I have downsized from my Quintrex Top Ender to a Quintrex Renagade 4.2 40hp Yamaha Minkota Eye Pilot and Humminbird Helix 9. If anyone is interested in having a fish with me they can contact me by email to colbra2@icloud.com.
Regards Col.
- 2
-
Hi
in Fishing Chat
Thank you all for making me feel at home on the forum. .
I did go out today, in the renegade late in the afternoon, I am try to get on top of all the upgrades features of the new minn kota terover I pilot. Pairing it in & setting the spotlock is not so easy for me.
Regards woywoy col
-
Hi
in Fishing Chat
Hi all its been some time since I have used this forum, at that time I had bought a Quintrex Top Ender 8.5 or 8.9 metres my memory is fading now.
I have one good friend and that being cargo5.
We have had many talks about all things including fishing not always agreeing ! Shared many camp fires stories
Well I have sold the Top Ender it was getting too big for me to push around, in my small yard. And in its place I have bought a Quintrex Renegade 4.2 with 40hp Yamaha along with a minn kota terrova i pilot and Humminbird Helix 10 Chirp MSI GPS Gen 3.
So with a bit of luck and a lot of practise and cargo5 advice I will be sending some reports both good and bad
Regards woywoycol
- 2
-
-
Hi Camo I am only on the start of my journey with plastic's I got some 2.5 engine oil grubZ. and 10g 3/0 HeadlockZ might have to put a swivel and sinker up the line if I can not get down quick enough
It is my intention is to try them out at rip in Brisbane Water on Sat or Sun this weekend very rough bottom but it is a small tide so my plan is hit the bottom lift quickley and just YO/ YO the water is shallow right on top of the rip and there are some faults going through the reef. I seen fish on the sounder last week but the tide was racing at the time.
woy woy col
-
Bit of a change of direction on this one works out $50 a night no dogs allowed. My position is we are on a pension and have dog.
I am now looking Malaluka caravan park Spencer.
Its a cross the river at spencer.
Thanks for the info on the muddies will not be going till September but the big bream in the river might be on now.
Tariff there is $30 a night has boat ramp stay a week extra night free. shop a hundred meters down the road.
But a bit worried about the ownership of the park would like some feed back on this one please you can pm me if you know.
-
Udate
On my last post $50 a day for the two of us that's wife and I, "No dogs" went over to Malaluka Caravan Park in Spencer $30 a night power included extra night free if you stay a week dog welcome straight across the river from Government wharf and Marlo creek I will book in late August early September........ Oh shop and bottlelo 100 meters down the road. have a beer at the Dunkirk
"no dog means no decky" "$50 a day means no wife"
woywoycol
-
Hi has any one fished out of the caravan park at greenmans valley on the Hawkesbury river via Mount White its near Marlo Creek and Government Wharf I am going there to day to have a look, will take some pictures and try to put them up.
I fished this area in the past and caught huge bream on black crabs..... 20yrs ago!
I am sure plastics would work there quite well. There is a boat ramp at the park. Plus clearing tables.
Would like some input on this just to see what interest there is in this place.woy woy col
-
Great effort Cammo 1808 when the rest of us were tucked up in bed .........well I was anyway
any chance of telling us what the plastic was you were using at the time.
And did you deep in hot water first....
regards woy woy col
-
Great catch how did you end up cooking the bream eat them hole or fillet.
woy woy col
-
congrats great looking rig.
Thanks Dave
regards woy woy col
-
Looks the goods Col. What's the first mod on the agenda?
Its just about got it all ........ so maybe a cocktail cabinet .........
woy woy col
-
Great boat Col. I am looking forward to fishing in it.
Hi John .....you are already booked in cabin on deck and balcony see you in November Col
-
A cabin with this cold!
No need it has a fire place.....
-
Looks the goods Col. What's the first mod on the agenda?
A grab rail around the front so the jewes can't pull me in woy woy col
and to stopt the grand kids falling out
-
-
G’day Bream
I can’t comment on the Suzuki, however I previously owned a Mercury 40hp 4 stroke which gave me a lot of grief. The motor had done less than 100 hours when I traded the boat, but it had been a hassle from day one. Irrespective of the price difference I wouldn’t consider buying another Mercury. My current boat is fitted with a Yamaha 60hp 4 stroke and I couldn’t be happier with it.
These comments are based on my experience only, others may have a different opinion.
I am with you Cargo5 I have had a number of Yamaha motors 5hp 25hp 15hp and now getting a 70 4stroke all have been excellent hope the 70 goes the same
woywoycol
Minn Kota heading sensor mounting
in Boating
Posted
Hi JA I have some answers for you can you call me on 0417243628. I would find it easy to explain. I to have the same Minn Kota Terrover plus Humminbird Helix 9 they all work in together in short move your heading sensor to the over side of you boat.
Regard Colin