Jump to content

lastworm

MEMBER
  • Posts

    188
  • Joined

  • Last visited

Posts posted by lastworm

  1. 17 hours ago, R E G I C Y C L E said:

    Great report Neil. It's surprising where you find silvers... we even have a self sustaining population in my local, the Nepean River.

    Yep, I remember chatting to an old bloke a few years back who was releasing a bunch of them into the upper Nepean. He had rescued them from his dam that was drying up during the drought.

    I suspect this on may have found it’s way into the system in a similar fashion.

    • Like 1
    • Thanks 1
  2. 1 rod, pack as light as possible.. It seems like a great idea taking a heap of gear with you, until you get out on the water and you can’t move or get a fish onboard because you’re surrounded by clutter.

    • Like 1
  3. Finally hit my local on Saturday afternoon which was long overdue. We’ve had rain, hot days and perfect conditions since my last fish up there, and whilst Saturday wasn’t “perfect conditions” it was a nice hot sunny afternoon with plenty of insect activity and I had a hall pass to get out.

    This would be my first trip fishing barbless hooks, although I wasn’t on the Nepean so didn’t have the issue of thousands of tiny bass. This system has fish few and far between but the quality is always better and I know there are some very well sized fish in there.

    I was fishing an OSP dunk suspending diver as the sun was still high. Hooked my first fish about 20mins in, felt decent but it hung me up on a snag and got off. I was cursing the decision to go barbless, although happy I did when I got my lure of the sunken snag.

    Fished on and lost another fish right near the kayak, damn barbless hooks! A bit further up a wayward cast hit the bank and a big old angry water dragon came down and snapped up my lure, managed to get him off without too much fuss, thank god I was fishing barbless!!

    After a few touches on surface I finally boated my first fish of 31cm to the fork on the diver. Not bad and fought way above its size.

    spacer.png

    Managed to land another 26cm forker on the way home after a few bumps but no hookups. Was starting to lose hope and cast into a spot that never produces for me, got a huge hit and solid hookup, after fighting deep for a few seconds I managed to land this football shaped 36cm forker, in mint condition and with an oversized rear dorsal fin and thumping big tail. A proper fight and finally a reward for the days frustrations.

    spacer.png

    spacer.png

    And thanks to the barbless hooks, even this was an easy and stress free release for both me and the fish.

    spacer.png

    So good having these fish so close to home, can’t wait to go back!

    • Like 13
  4. I think often what happens here is the fish is just sitting under the lure or following it, once it stops they see their opportunity to hit it.

    I’d hate to think how many times I’ve pulled a surface lure away from a big bass that was just waiting for my lure to pause.

  5. On 1/28/2023 at 12:12 AM, SWFisho said:

    Hey mate have fished the George’s landbased for years but never had luck launching the fresh side of the weir besides the bridge at glenny shoot me a dm bro I’ll Be keen to have a chat about it I fish the neapean because it has better kayak access but I fish the Georgesriver on the regular 

    I’m in exactly the same position as you, lived locally on the George’s for years and now drive almost an hour to the Nepean to catch bass as I found land based difficult and getting a kayak in always meant leaving your car in a dodgy area. I’ve spoken to a few guys that say the quality of fish in the George’s is much better overall.

    • Like 1
  6. 6 hours ago, Yowie said:

    Have you tried changing to a larger single hook instead of the trebles?

    I’m going barbless to see how that helps, also had way too many close calls with a finger or the inside of my leg.

    Failing that I’ll be going to singles

  7. Heard heaps of complaints about pliers rusting out in salt water, and also issues with aluminum rust proof models not being as strong and breaking.

    I’ve decided to go with a set of high quality forceps with cutters built in, two tools in one and hopefully theyperform as required.

  8. 11 minutes ago, Mike Sydney said:

    While we’re talking pliers, what’s the go to for maintenance? I’m on my third pair in two years from rusting, seizing up….I presume I should spray in with something- what, how often etc?

    INOX MX3 spray should keep them in top nick.

    I’ve found the spring mechanism on mine go before they rust, so I got some of those Rapala magsprings but the magnet isn’t as strong as the old fashion spring type.

    • Like 2
    • Thanks 1
  9. I was mostly thinking forceps would be better suited than pliers due to the tiny trebles most of my bass lures have. While pliers have the pulling power, forceps look as though they would make access to trebles a lot easier.

    • Like 2
  10. Anyone here using forceps when lure fishing? I’m looking at giving them a go for a few reasons, mostly the additional length to keep hands away from small sharp trebles, also the benefit of having cutters integrated in the one tool.

    • Like 2
  11. After being a surface addict for so many years, I've recently started getting into fishing with divers for bass - especially in the system I fish where they are prolific and I tend to  more smaller fish. Someone told me fish fight a lot harder on sub surface presentations, which I now know to be true based on recent experience.

    I went down to my local yesterday to sneak in a few hours on the water, started just after 2pm (not peak bite time by any means) and as usual was fishing surface from the get-go. After about an hour and not a single bit of interest I decided to throw on a Daiwa Spike, which has been getting me good results lately in terms of numbers. I was fishing a steep muddy bank covered in root balls and got completely cleaned up by something big, I fought it for about 5 seconds, before tightening the drag and it snapped me clean off in the middle of my leader. Brand new Spike - gone. This convinced me to throw on another and keep fishing. 

    I went all the way to the top of the system and got a smallish fish of around 26 fork length, turned back and started casting near a rocky cave that has never produced a fish, Had a huge take, fish went deep and was doing figure 8's around the Kayak, I thought I'd hooked a big carp. Fight went on for a few minutes before I had a chance to see the fish, nice big bronze bass. It took another few runs before I managed to get it in the net.

    Fish was in amazing condition and every bit of 36cm to the fork but it was difficult to get a good measure in the yak, the down side to fishing on your own is your photos are always ordinary....

    image.thumb.jpeg.aa9cb9516f6a1d593175688dc11a6c91.jpeg

    image.thumb.jpeg.aacce57e9e0139af75992a544d284810.jpeg

    Managed one more around the 30cm fork mark before leaving.

    image.thumb.jpeg.50ae7a8940aaac8080165b8bfb4c4152.jpeg

    Pretty good afternoon overall.

     

     

    • Like 9
  12. Started using braid 20 years ago, never looked back, bait and/or lure.

    The one time I’ll still use mono is off the beach, no need for braid and generally windy conditions and wash means too many tangles with braid.

    There are way more cheap braid options these days than back in the day, so doubt expense is the issue. I’d say the fact that your superstore tackleshop has more beginner customers just means less people have been exposed to braid and it’s benefits. It’d be different if you went into a local specialist tackle store I’m sure.

    • Like 1
×
×
  • Create New...