offtap1 Posted June 10, 2007 Share Posted June 10, 2007 With heaps of time on my hands at home bored due to weather, (killed me not being able to take Boat out for only the third weekend in 5 months straight) I was asleep the other night dreaming of another Beakie or YFT as usual when a Teaser project popped in mind, Heaps of thought , 1/2 hours work and approx $15 later with extra gear to make a second one i came up with this, What do yous guys reckon. Not that im hard up to purchase a Genuine teaser, I have several Hundred dollers worth in Four quality Teasers already , but this seemed different and looks the goods i think, But maybe its the Fourth Bottle of Johnnie Red i just opened since Friday night Talking , Who Knows. Input Required Boys, Give it to me. It is made using Alloy pipe of three different sizes, cut and drilled holes for tow lines, Front Pipe has been Modified to act as Bird Teaser, I have included a Cut and Turned in Section at Rear of each tube to create a bubble stream or smoking action as well as make them move around a bit, used a old Marlin 12" skirt at rear(No Hooks) , all up 3m long, Polished up Alloy and Clear coated, super light and can be stored in a Ice cream container. Tryed to represent Silver type bait fish being chased by Slimey or small Tuna. Im sure it will create a good spectacle with shiny chrome effect and Smoke stream to attract anything Pelagic. By the way i have a patent on this, so if i see someone else trolling one same wide of shelf be prepared to be cut off. By the way only joking about being asleep and dreaming the other night as i dont sleep , just dream all the time Link to comment Share on other sites More sharing options...
Chris 55 Posted June 10, 2007 Share Posted June 10, 2007 Dave Ahhhhhhh shiny , pretty mmmmmmmmmm nice Did you plug the front of the pipe or is it open ? Do you thing the round bar will work on the bird or will you need more of a wing ? Did you consider drilling a hole 2/3 - 3/4 of the way back to create the bubble stream if the fronts not plugged I'm a sucker for DIY projects Chris Link to comment Share on other sites More sharing options...
mrmoshe Posted June 10, 2007 Share Posted June 10, 2007 With heaps of time on my hands at home bored due to weather, (killed me not being able to take Boat out for only the third weekend in 5 months straight) I was asleep the other night dreaming of another Beakie or YFT as usual when a Teaser project popped in mind, Heaps of thought , 1/2 hours work and approx $15 later with extra gear to make a second one i came up with this, What do yous guys reckon. Not that im hard up to purchase a Genuine teaser, I have several Hundred dollers worth in Four quality Teasers already , but this seemed different and looks the goods i think, But maybe its the Fourth Bottle of Johnnie Red i just opened since Friday night Talking , Who Knows. Input Required Boys, Give it to me. It is made using Alloy pipe of three different sizes, cut and drilled holes for tow lines, Front Pipe has been Modified to act as Bird Teaser, I have included a Cut and Turned in Section at Rear of each tube to create a bubble stream or smoking action as well as make them move around a bit, used a old Marlin 12" skirt at rear(No Hooks) , all up 3m long, Polished up Alloy and Clear coated, super light and can be stored in a Ice cream container. Tryed to represent Silver type bait fish being chased by Slimey or small Tuna. Im sure it will create a good spectacle with shiny chrome effect and Smoke stream to attract anything Pelagic. By the way i have a patent on this, so if i see someone else trolling one same wide of shelf be prepared to be cut off. By the way only joking about being asleep and dreaming the other night as i dont sleep , just dream all the time Just another thought on your invention..And a nice piece of engineering it is too. Ever thought of having the tube filled with Glo-Bait? And have a small hole to the business end so it slowly leaks out in a steady stream...Might be something to consider. Don't know if it would add anything to your already brilliant device. Cheers, Pete. Link to comment Share on other sites More sharing options...
offtap1 Posted June 10, 2007 Author Share Posted June 10, 2007 (edited) Dave Ahhhhhhh shiny , pretty mmmmmmmmmm nice Did you plug the front of the pipe or is it open ? Do you thing the round bar will work on the bird or will you need more of a wing ? Did you consider drilling a hole 2/3 - 3/4 of the way back to create the bubble stream if the fronts not plugged I'm a sucker for DIY projects Chris No Left front open , thats why i turned tag in for flow threw, Also must mention Tag at rear pointing down which should push rear upward and with tow point at front of each pipe being at top and tow point at rear of each pipe being at bottom should give a good action, pulling against it self. Round bar on teaser should still work to create surface splash as when bird breaches water it will flick back and forth as bar comes in contact with water with flow under bar pushing bar back up when it first meets surface. ( All Theorie at this stage but sounds good Eh). Ill post a pic when i produce the goods next outing. Edited June 10, 2007 by offtap1 Link to comment Share on other sites More sharing options...
Chris 55 Posted June 10, 2007 Share Posted June 10, 2007 I have a picture of you running along a pool to tank test it Chris Link to comment Share on other sites More sharing options...
Chris 55 Posted June 10, 2007 Share Posted June 10, 2007 Chris It's just basic hydrodynamics of creating pressure points and the reaction expected Force -> / pushes down Force -> \ pushes up Chris Link to comment Share on other sites More sharing options...
fishyfingers Posted June 10, 2007 Share Posted June 10, 2007 Dave, put sandbags ascross the storm water drain out the front of the house, wait for the water to bank up and try it in there first! If it works, I'll back it and we'll start mass production in China at the end of the year .... Wattos can market it! Link to comment Share on other sites More sharing options...
offtap1 Posted June 10, 2007 Author Share Posted June 10, 2007 Chris It's just basic hydrodynamics of creating pressure points and the reaction expected Force -> / pushes down Force -> \ pushes up Chris Like i Said Thanks Chris55 Dave, put sandbags ascross the storm water drain out the front of the house, wait for the water to bank up and try it in there first! If it works, I'll back it and we'll start mass production in China at the end of the year .... Wattos can market it! Im now spewing i didnt have production started last friday as saturday i had 6 inches of water flowing on road out front with no sand bags required. With Production in China theorie I really Want to keep production Aussie based but will talk over at general meeting sceduled soon. Stay Tuned. Man im bored Link to comment Share on other sites More sharing options...
Guest MRS WATTO Posted June 10, 2007 Share Posted June 10, 2007 WHY DONT YOU START SELLING THEM AS OFFTAP TEASERS THRU WATTOS I WOULD LIKE ONE PLEASE, BUT NOT PURPLE, MAYBE PINK Link to comment Share on other sites More sharing options...
offtap1 Posted June 10, 2007 Author Share Posted June 10, 2007 WHY DONT YOU START SELLING THEM AS OFFTAP TEASERS THRU WATTOS I WOULD LIKE ONE PLEASE, BUT NOT PURPLE, MAYBE PINK But im the Teaser at Wattos Link to comment Share on other sites More sharing options...
offtap1 Posted June 10, 2007 Author Share Posted June 10, 2007 WHY DONT YOU START SELLING THEM AS OFFTAP TEASERS THRU WATTOS I WOULD LIKE ONE PLEASE, BUT NOT PURPLE, MAYBE PINK Like this one Clauds , this one is for my next build if first trial test works. Mmmmmmmmmmmmmm Pure Blondes with Pink Teasers, got to be happy with that combo Link to comment Share on other sites More sharing options...
grantkingfish Posted June 12, 2007 Share Posted June 12, 2007 Like this one Clauds , this one is for my next build if first trial test works. Mmmmmmmmmmmmmm Pure Blondes with Pink Teasers, got to be happy with that combo YEA CLAUDES CAUSE ONLY PURE BLONDES ARE ALLOWED ON THE BOAT!!!!!!!! Link to comment Share on other sites More sharing options...
Sammy0884 Posted June 12, 2007 Share Posted June 12, 2007 Looks great Dave! i have contemplated rigging up some empty beer cans as teasers, heard they work well until marlin swallow them! Link to comment Share on other sites More sharing options...
Guest MRS WATTO Posted June 12, 2007 Share Posted June 12, 2007 Like this one Clauds , this one is for my next build if first trial test works. Mmmmmmmmmmmmmm Pure Blondes with Pink Teasers, got to be happy with that combo PINK IS A GREAT COLOUR DAVE, IT REALLY WILL SUIT YOU DARLING AND IT WILL MATCH YOUR BOAT Link to comment Share on other sites More sharing options...
grantkingfish Posted June 12, 2007 Share Posted June 12, 2007 PINK IS A GREAT COLOUR DAVE, IT REALLY WILL SUIT YOU DARLING AND IT WILL MATCH YOUR BOAT YEA DAVE!!!!!!!! PINK AND BLONDE ARE THE BEST 2 COLORS!!!!!!!!!!1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now