garfield28 Posted August 4, 2015 Share Posted August 4, 2015 Hi All, Further to my problem of my transducer giving me incorrect readings, I put the breadboard on the transom and moved the position of my transducer, well now I have a massive spray of water coming out the back - a rooster tail I believe I have read. Any ideas if its just a case of moving the transducer or if I need a cover or something? It's quite annoying looking back and seeing this spray all over the cowling of my outboard etc. Thanks Geoff Link to comment Share on other sites More sharing options...
Ric001 Posted August 4, 2015 Share Posted August 4, 2015 I had a similar problem till I raised the sensor up. The tail is caused by sensor too low. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
stevefish Posted August 4, 2015 Share Posted August 4, 2015 I had a similar problem till I raised the sensor up. The tail is caused by sensor too low. Sent from my iPhone using Tapatalk Yep, your transducer should skim, not gouge Link to comment Share on other sites More sharing options...
garfield28 Posted August 4, 2015 Author Share Posted August 4, 2015 Thanks for the replies. So I need to raise it a touch you think hey...? Link to comment Share on other sites More sharing options...
locodave Posted August 5, 2015 Share Posted August 5, 2015 Yes and make sure there is no strake behind it. Can you post any pics? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now