allen_f Posted January 3, 2016 Share Posted January 3, 2016 No issues thus far, although itll be best not to leave it in the sun i guess haahah. My first application of silicon (not allclear) did come off after a rough day of my battery box sliding around and smacking the foam holder. I think sanding the surface of the yak would help with the sticking. Link to comment Share on other sites More sharing options...
DerekD Posted January 3, 2016 Share Posted January 3, 2016 I'd suggest trying it without the sanding to start with. Depending on how you scuff it up there might be places for bubbles to hold. If you just clean the surfaces well and it fails you can always resort to sanding as a second go. The marine goop in mine still looks to be holding properly after 2 years of use. Link to comment Share on other sites More sharing options...
BigRod Posted January 4, 2016 Share Posted January 4, 2016 Krause just stop being a tight arse and buy a hobie pro angler Link to comment Share on other sites More sharing options...
krause Posted January 4, 2016 Author Share Posted January 4, 2016 Haha broke uni student, no money! unless yours is going cheap rod? Link to comment Share on other sites More sharing options...
BigRod Posted January 5, 2016 Share Posted January 5, 2016 i think its time we plan a botany bay trip Link to comment Share on other sites More sharing options...
krause Posted January 5, 2016 Author Share Posted January 5, 2016 Kurnel? Link to comment Share on other sites More sharing options...
BigRod Posted January 5, 2016 Share Posted January 5, 2016 looks the easiest place to launch and to get live baits Link to comment Share on other sites More sharing options...
krause Posted January 5, 2016 Author Share Posted January 5, 2016 Agreed. It's a hell if a paddle in the bay Link to comment Share on other sites More sharing options...
BigRod Posted January 5, 2016 Share Posted January 5, 2016 oh thats right you paddle ... haha was looking at yarra bay and peddling over to melo point Link to comment Share on other sites More sharing options...
krause Posted January 5, 2016 Author Share Posted January 5, 2016 I can find yarra bay, dunno what melo point is Link to comment Share on other sites More sharing options...
krause Posted January 5, 2016 Author Share Posted January 5, 2016 Im keen on that, or another kembla trip. Kembla with have less runoff/color/debris from the rain? Link to comment Share on other sites More sharing options...
krause Posted January 5, 2016 Author Share Posted January 5, 2016 Might be a bit warmer as well Link to comment Share on other sites More sharing options...
BigRod Posted January 5, 2016 Share Posted January 5, 2016 cant this weekend maybe next Link to comment Share on other sites More sharing options...
krause Posted January 5, 2016 Author Share Posted January 5, 2016 Weekdays still or are you back at work Link to comment Share on other sites More sharing options...
BigRod Posted January 5, 2016 Share Posted January 5, 2016 back at work Link to comment Share on other sites More sharing options...
krause Posted January 5, 2016 Author Share Posted January 5, 2016 Through a weekend day aside and make a thread, we'll see what goes Link to comment Share on other sites More sharing options...
BigRod Posted January 7, 2016 Share Posted January 7, 2016 maybe sunday the 17th Link to comment Share on other sites More sharing options...
krause Posted January 9, 2016 Author Share Posted January 9, 2016 Ok guys, don't know. This is the yak in the pool, does it look correct or have a managed to get bubbles in the mix? Cheers guys Link to comment Share on other sites More sharing options...
DerekD Posted January 10, 2016 Share Posted January 10, 2016 On the whole it looks good but that something funny is going on in the top part of the screen. Before you rip out your hard work play around with the settings (like reduce sensitivity) and take it out in deeper water. As you only have 3 feet in the pool it has scaled signals up accordingly so what could even be the plastic of the kayak might disappear when the depth and thus scale is increased. My sonar even has a fresh versus saltwater setting which affects the results. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now