pappy
-
Posts
114 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Fishing Tips, Advice and Articles
Blogs
Store
Posts posted by pappy
-
-
Hi Pappy, we have fitted these units and I have used them in the water.They are good units and very well priced to get down imagining, but personally I would either spend the extra and get the HDS-5 unit with structure scan to give both SI and DI, liek in the picture above or the HB equivelant. The reason being the Elite DSI can only look down in down imagining mode and not both 2D and DI which sometimes is very handy.
Cheers,
Huey.
thanks huey will have a look at the hds 5 . pappy
-
thanks for the replys i think i will be getting one .pappy
-
hi has anybody got or have seen the elite 5 x dsi working on the water if so are they as good as lowrance say they are .thanks pappy
-
just wandering if its happening only when you use your ignition
mine done this so i just bought a lil 80ah deep cycle battery
for all my accessaries
hope this helps
cheers
thanks for your reply fishon it can happen any time when the motor is going or when drifting i am sending it to navico to have a look at. cheers pappy
-
hey Pappy1,
I had a similar problem with my gps a while back and it turned out to be the connecting pin in the back of the gps, it was a little squashed from plugging and unplugging (removing from boat after fishing trips). I just used a bait needle to open all the pin's and never had the problem since. They looked fine but must not have been getting 100% connection. Give that ago..
Benny..
thanks benny i will have a look at them . cheers pappy
-
hi i have a eagle fish elite 640c sounder and the problem that i am having is that i will turn it self off then back on in the blink of a eye then you have to put all your setting back in .i have checked all wiring and volts and battery is good .i have read that they have a over volt protection if so what volts would it be.thanks pappy1
-
-
thanks for the reply i will not ues it .
-
hi i have been given some xd 100 oil .can i use it in premixed oil fuel to run in a 25 hp merc. cheers pappy
-
hi all just a thing to remember with the inflatable pfd is thy will need to be serviced as per manufacturer instructions if this is not done you can get a fine .i manly fish inland and estuary waters so i will be getting a good pfd 2 my kids all wear pfd 1 .pappy
-
-
Top fish ! Can I ask as a fighting fish how do you find them? I have found them to be a bit sluggish but I have never got a 4kg one though.
Also how do you cook them?
My dad has been talking about getting up there for a camp and a fish for sometime - it's nice to see there is a bit of water too
gav
hi yes they can be a bit sluggish in the cold water but as it warm up they go a bit harder .i don't cook them i release all the native i catch .cheers
-
That is a mad fish well done
How is the dam after all this rain? i herd Burrendong has risen to 98% in the last 3 weeks from 20%
hi windamere is at 26 % burrendong is 98% looking good for the season.cheers
-
goran is right in saying that they are not much in the eating department at that size .i release all the natives that i catch .carlo27 windamere is in the central west between lithgow and mudgee.
-
Nice fat yella Pappy.
Lures or bait?
hi the stand out lure was a jackall tn 70 brown crawfish .cheers
-
Great yellow mate , good to see them feeding in such cold weather ,what was the water temp?
water temp was 15 to 16 and a bit dirty should be firing next month when water gets up around 20deg .
-
-
G'day Pappy 1,
Having just got back from a quick visit to see my mate at the Pure Fishing warehouse,i was going to suggest that if they have'nt got what you need in their huge range of spares,then you might have to look at a new reel.
But i see that everything has worked out in your favour,gotta be happy with that!
Cheers,
Bruce
yep all good thay are top people to deal with .pappy
-
got on to purefishing and thay are sending me out a new gear so all good. cheers pappy
-
If you can get one, it will be from the distributors. Send an e-mail to Pure Fishing... info@purefishing.com.au
They are incredibly helpful and have an excellent service and parts department. Being an older model, I'm not sure of availablity... some brands, like ABU or PENN have parts available for reels that are 30 years old... others discontinue parts waaaay too regularly.
If the part is available, they're the best ones to sort you out. If they can't get them you can try Mike's Reel Repair in Canada. They're the guys who have schematics on line (although they don't have the catera). I checked their parts list and they do have it listed BUT getting parts from them can take months and months. Have a look here
By the way, if possible don't just get a drive gear... if ever you have to replace the drive or pinion gear in a reel you should do both together so you get a matched set and because when one of them is damaged, it will almost certainly have damaged the other.
Cheers, Slinky
thanks for your reply slinky i will send purefishing a email and see how i go. cheers pappy
-
hi i needed a drive gear for a shakespeare catera 6625 spinning reel as mine has striped the the gears .thanks pappy
-
thanks for the reply .yes hoggey i did troll big stumpjumper and 140 j d lures but i think on the day the cod & yellas where up in the top layer where the redfin were .fished the dam today for to yellas and three redfin the big cod do bit in the colder months but you have to put in some long hour.will be fishing windermere in to week i will let you no how i go .cheer pappy
-
got the cod trolling a tn 70 around the schools of redfin
-
hds alongside a elite 5
in Boating
Posted · Edited by pappy1
hi i have a lowrance elite 5 fish finder and would like to run a hds 5 along side it as thy both are 83/200 khz will they interfere with each other .thanks pappy