inhlanzi Posted August 20, 2006 Share Posted August 20, 2006 G'day Raiders I have my boat in for winter service and I would like to get all the rusted U-Bolts on my trailer replaced. I have been to a few places and have discovered I have an odd size trailer frame. 77mm x 77 mm I am looking for 80mm (inside measurement) X 150mm height 50mm (inside measurement) X 140mm height 45mm (inside measurement) X 75mm height Any help would be appreciated cheers inhlanzi Link to comment Share on other sites More sharing options...
tiger_shark Posted August 20, 2006 Share Posted August 20, 2006 Carasel Trailers Pty Ltd 321 Newbridge Rd Moorebank NSW 2170 ph: (02) 9601 3666 Carasel Trailers Pty Ltd 518 Great Western Hwy Pendle Hill NSW 2145 ph: (02) 9636 1133 Link to comment Share on other sites More sharing options...
Guest Aron Posted August 20, 2006 Share Posted August 20, 2006 G'day Raiders I have my boat in for winter service and I would like to get all the rusted U-Bolts on my trailer replaced. I have been to a few places and have discovered I have an odd size trailer frame. 77mm x 77 mm I am looking for 80mm (inside measurement) X 150mm height 50mm (inside measurement) X 140mm height 45mm (inside measurement) X 75mm height Any help would be appreciated cheers inhlanzi Some very weird sizes there Bais only have: U Bolts for Swivel Brackets 7227 Suits chassis 50 x 50mm Pair $6.50 7228 Suits chassis 75 x 50mm Pair $6.70 7229 Suits chassis 100 x 50mm Pair $6.90 I have checked the trailer repair centre cataloge and they have no matching sizes You can buy galvanised brooker bar (theaded rod) from bunnings and cut and bend your self - but you will lose a lot of stenght. or you can use galvanised plate with bolts like this Link to comment Share on other sites More sharing options...
pirate pete Posted August 20, 2006 Share Posted August 20, 2006 Try Caravan Accessories at 33 Rocky Point Rd Kogarah 9588-4463 Here is a link to their Catalogue http://www.camec.com.au/images/catalogue%2...s/NSW%20Cat.pdf There is a wealth of information on axles, Hubs and Bearings, Springs. U Bolts on page 69 Pete Link to comment Share on other sites More sharing options...
inhlanzi Posted August 21, 2006 Author Share Posted August 21, 2006 Appreciate the replies gents. I will let yo know how I go. Thanks inhlanzi Link to comment Share on other sites More sharing options...
Guest rzep Posted August 21, 2006 Share Posted August 21, 2006 Inhlanzi, There is a place out the back of St Mary's that custom make all that sort of stuff. If you don't have any luck send me a message and I will get their details for you. Regards Paul. Link to comment Share on other sites More sharing options...
Guest rzep Posted August 25, 2006 Share Posted August 25, 2006 Quinfish, That is the place that I was talking about. Regards Paul. Link to comment Share on other sites More sharing options...
inhlanzi Posted August 26, 2006 Author Share Posted August 26, 2006 Thanks for the advise and help raiders. I have managed to get just about all I need except for one size of u-bolt. I need 12 of them. It is flat bottomed and is 43 mm between the legs and 75mm high and is 10mm thick. This one is needed to hold the wobbly roller cross bars onto the main swing arms. I got the rest of the U-Bolts with washers and nuts ($8 each) and leaf springs at Boeing Trailers in Parramatta. Very helpful bloke there. Got the high tensile bolts at Lee Brothers Bolts also Parramatta. Looks like St Marys will be the go for this oher wierd size. Thanks rzep and quinfish. cheers inhlanzi Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now