mushtaka Posted November 20, 2007 Posted November 20, 2007 Hi guys, i went to get my 70hp Evinrude motor serviced the other day, just a basic service and the guy wants to charge me $700 is that normal for a standard service? Thanks.......
Flightmanager Posted November 20, 2007 Posted November 20, 2007 That sounds a little on the high side , but it depends on how much work he does. If he is going to strip down and rebuild the carbs , retune , do water pump impeller and housing , check gearbox oil etc , it could go close to that amount . If only a basic service , ie plugs , change gearbox oil and fit new water pump , I would have thought $400 - $500 tops. Ross
pelican Posted November 20, 2007 Posted November 20, 2007 (edited) That sounds a little on the high side , but it depends on how much work he does. If he is going to strip down and rebuild the carbs , retune , do water pump impeller and housing , check gearbox oil etc , it could go close to that amount . If only a basic service , ie plugs , change gearbox oil and fit new water pump , I would have thought $400 - $500 tops. Ross Basic service 400-500- hell Time plugs 30min, gearbox oil 20min, water pump 40min that's 1.5 hours .parts $150. 250 to 350 for labour that's over 120 and hour- no way. You must get a happy ending as well Just joking Ask for ll the detalis of what he going to do as otherwise it is just guesswork but on the surface that seems expensive. Ask what his labour rate is and what the parts / consumables cost was. What year model Evinrude , 2 stroke carby? and is t a BRP dealer? Edited November 20, 2007 by pelican
mushtaka Posted November 21, 2007 Author Posted November 21, 2007 Basic service 400-500- hell Time plugs 30min, gearbox oil 20min, water pump 40min that's 1.5 hours .parts $150. 250 to 350 for labour that's over 120 and hour- no way. You must get a happy ending as well Just joking Ask for ll the detalis of what he going to do as otherwise it is just guesswork but on the surface that seems expensive. Ask what his labour rate is and what the parts / consumables cost was. What year model Evinrude , 2 stroke carby? and is t a BRP dealer? Thanks guys, i will ask him.... its a 4stroke 2002 model. i might get a bit more info on what he will do. thanks
Flightmanager Posted November 21, 2007 Posted November 21, 2007 OK , if its a 4 stroke , there is a bit more work involved , oil and filter change etc. In that case , $600 - $700 doesnt sound that bad . Ross
a boat Posted November 21, 2007 Posted November 21, 2007 Hi, if it goes acording to plan and no surprises pop up a yearly service on your engine should only run into about $500 with the "Raider" discount. His quote seems a bit high to me and if your engine does not have a problem just the scheduled service than I would ask why so much. Cheers, Huey.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now