Berleyguts Posted October 25, 2010 Share Posted October 25, 2010 (edited) is there an easy way to determine what type of wheels a trailer has just by looking at them? I will want to change the bearings soon and need to know which ones to buy. It is a Brooker trailer and the wheels are smaller.. 10 inch maybe??? Do I need to publish a photo? Thanks, Baz Edited October 25, 2010 by Berleyguts Link to comment Share on other sites More sharing options...
Geoff Posted October 26, 2010 Share Posted October 26, 2010 As far as I am aware there is no way to tell if they Ford or Holden from just looking at the rims . Having said that , I think Brooker use Holden. The only sure way is to remove one of the outer bearings , take a note of the bearing No. stamped on the side & contact on of the bearing companies like CBC for information & / or a new set of bearings. If you know the approx age of the trailer contact Brooker , they may be able to advise enquiries@brookermarine.com.au Geoff Link to comment Share on other sites More sharing options...
Berleyguts Posted October 26, 2010 Author Share Posted October 26, 2010 As far as I am aware there is no way to tell if they Ford or Holden from just looking at the rims . Having said that , I think Brooker use Holden. The only sure way is to remove one of the outer bearings , take a note of the bearing No. stamped on the side & contact on of the bearing companies like CBC for information & / or a new set of bearings. If you know the approx age of the trailer contact Brooker , they may be able to advise enquiries@brookermarine.com.au Geoff Thanks Geoff. All the info is on the plate on the compliance plate on the the trailer, so I'll provide all that to Brooker and ask them. I didn't even think they'd be Holden or Ford, given that they are small wheels! Cheers, Baz Link to comment Share on other sites More sharing options...
Evets Posted October 26, 2010 Share Posted October 26, 2010 Its not the size of the wheel that determines the bearing size. Its the hub and the axle. One quick way of checking the hub is to measure from the centre of one wheel stud to the centre of the next. Ford hubs are 68mm from stud to stud Holden HT / Early Holden hubs are 65mm from stud to stud Holden HQ hubs are 72mm from stud to stud Another way to check is to look at the axle. Round 39 mm and square 40 mm axles usually use Holden bearings and 45 mm square axles usually use ford bearings. But the best way is to pull off the bearing and measure the diameter of the axle right next to the flat part of the axle. If it measures 31.7mm it uses holden bearings and if its 34.9mm then its a ford bearing. Evets Id bet they are Holden bearings. Link to comment Share on other sites More sharing options...
Berleyguts Posted October 26, 2010 Author Share Posted October 26, 2010 Its not the size of the wheel that determines the bearing size. Its the hub and the axle. One quick way of checking the hub is to measure from the centre of one wheel stud to the centre of the next. Ford hubs are 68mm from stud to stud Holden HT / Early Holden hubs are 65mm from stud to stud Holden HQ hubs are 72mm from stud to stud Another way to check is to look at the axle. Round 39 mm and square 40 mm axles usually use Holden bearings and 45 mm square axles usually use ford bearings. But the best way is to pull off the bearing and measure the diameter of the axle right next to the flat part of the axle. If it measures 31.7mm it uses holden bearings and if its 34.9mm then its a ford bearing. Evets Id bet they are Holden bearings. Thanks - that is great info. Looks like you win. 65mm stud to stud and 40mm square axle. I will get a set of Holden bearings this weekend so I can change them as soon as I get the chance (and have a mate handy to show me how:)) Cheers, Baz Link to comment Share on other sites More sharing options...
coasty1 Posted October 26, 2010 Share Posted October 26, 2010 You can just as easy take the old hub with you as easy to remove,you can tell the difference just by site between the HQ and HJ,they are considerabley different,they normally come with hub and bearing kits,it isnt much more money for the lot,just letting you know what i went through myself:thumbup: Link to comment Share on other sites More sharing options...
Berleyguts Posted October 26, 2010 Author Share Posted October 26, 2010 You can just as easy take the old hub with you as easy to remove,you can tell the difference just by site between the HQ and HJ,they are considerabley different,they normally come with hub and bearing kits,it isnt much more money for the lot,just letting you know what i went through myself:thumbup: Thanks. I've researched and you can get a full galvanised hub with bearings, dust cap, seal & nuts for about $35 each, so I might take that route. Also, I've worked out that my my box trailer has HQ type studs. Cheers, Baz Link to comment Share on other sites More sharing options...
BFB Posted October 26, 2010 Share Posted October 26, 2010 The type of wheels do not determine the type of bearings. My boat trailer has holden HT wheels but runs Ford bearings and my box trailer has Ford wheels but runs Holden bearings. It is normally the size of the axle. For larger axles and heavier loads Ford bearings are normally fitted and for smaller axles and lighter loads Holden bearings are fitted. 1 Link to comment Share on other sites More sharing options...
bluebottle18 Posted October 26, 2010 Share Posted October 26, 2010 Now I am really confused. I can not believe there is so many options. Good luck BG on getting the right ones. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now