warnie100 Posted January 26, 2013 Share Posted January 26, 2013 Hi guys finally got the boat on the water butthe engine sputters and misses at idle any ideas of what causes this and it cuts out thanks in advance Link to comment Share on other sites More sharing options...
Basil D Posted January 26, 2013 Share Posted January 26, 2013 HI Mate check out the coils first, you will need a multi meter and just compare all of them to each other, I cant remeber the specs but I had a dud one, when I replaced it never Idled better. Havind said that, get the motor tuned by a profesional, it wil need sincronising, Timming, carby checked, all electronics checked and you wont look back Link to comment Share on other sites More sharing options...
warnie100 Posted January 26, 2013 Author Share Posted January 26, 2013 Thanks groper Link to comment Share on other sites More sharing options...
Guest Aussie007 Posted January 26, 2013 Share Posted January 26, 2013 if it was running fine last time u used the engine drain the carburetors and drain all the fuel in your fuel hose that joins the fuel tank to the engine Link to comment Share on other sites More sharing options...
warnie100 Posted January 26, 2013 Author Share Posted January 26, 2013 Thanks gazza done thatno difference Link to comment Share on other sites More sharing options...
Guest Aussie007 Posted January 26, 2013 Share Posted January 26, 2013 check all 4 spark plugs and compare each look for any with a different color wet,dry,tan,black etc... u could be running on 3 cylinders Link to comment Share on other sites More sharing options...
Geoff Posted January 26, 2013 Share Posted January 26, 2013 Hi guys finally got the boat on the water butthe engine sputters and misses at idle any ideas of what causes this and it cuts out thanks in advance What happens when you give it some throttle , the same thing or does it run smoothly?? If smoothly , is it instantaneously or does it take 10 - 20 seconds to run correctly? Geoff Link to comment Share on other sites More sharing options...
Basil D Posted January 27, 2013 Share Posted January 27, 2013 ok lets start from the basics, dont forget the compresion test if its running rough. I have a rapaire manual with all specs needed, I can send you the coil readings if required. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now