alluring Posted July 12, 2013 Share Posted July 12, 2013 Gonna wag a day of uni and head out for a fish with some mates this week for the first time in a while.. Got a heavy new setup I'm keen to try and going to pre tie a few rigs as a backup. Just wondering how people store them? I was thinking maybe wrap each around a cork and set the hook in it? Or are there more efficient ways? I'll have a couple of rigs for catching livies, a few to actually run the bait out on, and I'll tie a couple of paternosters up to run the bottom for snapper or grouper on my other rod if livies don't produce. On that note as well, what knots would hold well for my live bait rig? I know the setup of the rig (balloon floating) but not sure what knots are strongest. Targeting land based kingies for the first time. 50lb braid and 60lb leader on the big one. Cheers!! Alluring Link to comment Share on other sites More sharing options...
finbar12 Posted July 12, 2013 Share Posted July 12, 2013 Try using sponges or sections of pool noodles to hold your rigs, that's what I use. Link to comment Share on other sites More sharing options...
shak4g63 Posted July 12, 2013 Share Posted July 12, 2013 Gonna wag a day of uni and head out for a fish with some mates this week for the first time in a while.. Got a heavy new setup I'm keen to try and going to pre tie a few rigs as a backup. Just wondering how people store them? I was thinking maybe wrap each around a cork and set the hook in it? Or are there more efficient ways? I'll have a couple of rigs for catching livies, a few to actually run the bait out on, and I'll tie a couple of paternosters up to run the bottom for snapper or grouper on my other rod if livies don't produce. On that note as well, what knots would hold well for my live bait rig? I know the setup of the rig (balloon floating) but not sure what knots are strongest. Targeting land based kingies for the first time. 50lb braid and 60lb leader on the big one. Cheers!! Alluring Hi mate,2 methods of rig storage- These will save you many hours of heart ache and fumbles when the fishing action heats up and you need a rig ASAP. Make these beforehand so you have perfect knots and ready to use for your preferred application and fishing styles Method 1. Get a kids pool noodle cut to 20 -30cm length with a knife cut some grooves in it loosley tie your rigs around the pool noodle following the 1cm grooves . Start with the swivel end first until you wrap it around finishing with your hook going in last and put the sharp ends into noodle so they are secure. So when u get fishing just pull out the hook and unwrap ready to tie your rig! Note: wrap it in a cloth or plastic bag to keep the salt out and hooks away from your fingers when reaching into your tackle bag Method 2. Make your rig and loop neatly and place in a glad zip lock bag of appropritae size label them eg." 6/0 hook with 40lb leader -snapper rig". A bit like the ones you get pre made from tackle stores. ....... Hope this helps..... Tight lines!, Shakeel Link to comment Share on other sites More sharing options...
oz_brett Posted July 12, 2013 Share Posted July 12, 2013 Method 2. Make your rig and loop neatly and place in a glad zip lock bag of appropritae size label them eg." 6/0 hook with 40lb leader -snapper rig". A bit like the ones you get pre made from tackle stores. ....... Hope this helps..... Tight lines!, Shakeel Thanks Shakee you saved me typing it myself :-) This is what I do I make about 20 at a time, they can get sprayed with salt water in the back of the boat & left for weeks they dont get rusty. Brett Link to comment Share on other sites More sharing options...
Geoff Posted July 12, 2013 Share Posted July 12, 2013 Last cast has covered the two most common options , using a noodle for heavy rigs & plastic bags for lighter rigs. A few additional comments , for heavy rigs or ones with luers tackle shops sell plastic rings like the yellow ones in this photo. As I mainly fish light , the majority of my rigs are in plastic bags then in a container. This one can store up to 20 packets , easy to identify , access & take up a minium of space. Geoff Link to comment Share on other sites More sharing options...
Scratchie Posted July 12, 2013 Share Posted July 12, 2013 Zip lock bags definitely the go! You can label them, lb line, size hook, what rig etc! Make for easy use and changing. And you then have somewhere to put your unwanted line until you get home. Cheers scratchie!!! Link to comment Share on other sites More sharing options...
LeoB Posted July 12, 2013 Share Posted July 12, 2013 G'day Another tip, if using pool noodles DO NOT write on the noodle with a permanent marker unless you like throwing out rigs. The ink marks fishing line after a while. Cheers Leo Link to comment Share on other sites More sharing options...
alluring Posted July 13, 2013 Author Share Posted July 13, 2013 thanks for the tips guys. I ended up using corks for my baitfish rigs, it worked really with the multiple hooks cause I set them around the top, although I'll use the zip locks for my paternosters! And any suggestions for strong knots for my 60lb leader which I'll run my livies out on? Link to comment Share on other sites More sharing options...
chr42is Posted July 13, 2013 Share Posted July 13, 2013 I use a double Albrite knot 9 up 7 back works for me. I pack all ready made rigs in zip money bags. Link to comment Share on other sites More sharing options...
Chimira Posted July 13, 2013 Share Posted July 13, 2013 I just roll them up around my hand few loops through with the hook and pop them in tinni snap lock bags ... They pack flat and you carry heaps of different rigs in a little space Link to comment Share on other sites More sharing options...
fisholb Posted July 13, 2013 Share Posted July 13, 2013 I use d coasters d pub/club uses...put a couple of small cut on it so u can sort of insert d swivel/hook then insert in a zip lock bag...works for me Link to comment Share on other sites More sharing options...
fisholb Posted July 13, 2013 Share Posted July 13, 2013 Best knot for 60lb...I still use uni but make sure d line is wet when tightening d knot...or invest on a crimping tools. ..make sure u melt d end of d line when crimping as added security...hope this helps...goodluck Link to comment Share on other sites More sharing options...
SMn Posted July 15, 2013 Share Posted July 15, 2013 Zip locks for sure, work great when storing rigs for the beach, sometimes a small piece of sponge or noodle on the point of the hook if you can bothered stuffing around with it. Always use a uni knot with most of my rigs now, especially anything over 20lb... not had a problem on some reasonable sharkies using 60lb and 100lb mono with a uni knot off the beach. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now