Rodb73 Posted July 6, 2014 Share Posted July 6, 2014 Hi all, I set up my batteries and VSR today, which according to the schematic, all went to plan. My question to anyone that might know is; Is it normal that; position 1 is auxiliaries Position 2 is main Then both or off Also, as it currently sits, I can only start the motor from position 2, which means when running electronics, I have to flick to # 2 to start and in turn, temporarily losing all electronics. Is it okay to switch to both to start so that I don't have to lose lights etc at night time? Or, could I be wrong? Thanks. Rod. Link to comment Share on other sites More sharing options...
Geoff Posted July 6, 2014 Share Posted July 6, 2014 (edited) The switch normally has 4 positions , Battery 1 , Battery 2 , Both , & Off. You should be able to start the motor or run the electrics from either battery. If you start the motor from , say , battery 1 then during the day want to switch to No.2 the switch is , 1 , both , 2. Ie , there is always power going to the electrics unless you turn the switch to the "Off" position. Geoff Edited July 6, 2014 by Geoff Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now