Jump to content

anthman

MEMBER
  • Posts

    495
  • Joined

  • Last visited

  • Days Won

    3

Posts posted by anthman

  1. A quick report: fished the area after the 4knt zone (heading downstream) at around 7am. Lots of bait fish jumping around. 

    Eventually saw fish jumping out of the water, busting up the bait.

    These were small bust ups and lasted maybe a minute before disappearing - just enough to motor over and get 1-2 casts in.

    After many failed attempts and lure changes, these were the lures that worked:

    * 5g silver metal, treble on the tail (about 50% hookup rate)

    * 3" cas clear minnow powerbait (about 15% hook up rate)

    * 15g silver slow jig (this was the most effective, every cast hooked up)

    This went on for about 2 hours - on and off and they went all around that area. 2-4kg rods were insufficient, 3-6kg rods were struck the balance of power and enjoying the fight.

    • Like 7
  2. On 12/17/2021 at 1:10 PM, Green Hornet said:

    Out in the field if I retie an FG, I often skip winding to loop of the rizzuto around the twists and close the knot off kind of like a uni knot.

    I haven't noticed any difference either way, as its only to lock the knot off and has nothing to do with maintaining knot strength.

    Totally agree, just for a nicer finish, I sometimes just trim of the tag end in the field.

    • Like 1
  3. Hi all, after many months of not fishing on the boat, im finally taking it out tomorrow!

    I have a new downrigger that I'm dieing to try out and a freezer full of squid heads from April earlier this year. 

    Ive heard there are some big kings around North head and South head, but particularly the artificial and the colours around South head - is this the case?

    Looking to try downrigging for a legal king - looking for any advice for the current hotspots to try at the moment but particularly around South head (Goto baits, depths, terrain and signs to look for on the sounder, how long you downrig for).

    My current plan is to downrig around South head, the Bommie, around 100m from the shoreline, around the artificial reef (not over), and if all else fails - following the shoreline of North head from the inside, the corner, then on outside. Depth of about 5-10m off the bottom, squid head halves with dangly bits.

    Thanks all - would absolutely make the bucket list to catch a 1m kingie, but I guess there is a reason why it's on most Sydney fisho's bucket lists...

  4. Rod tubes is a great idea, inexpensive and near bullet proof.

    Otherwise maybe spend less on your rods if you are prone to breaking them - definitely stick to graphite but grab them on sale / cheaper versions. I've found some boating camping fishing store brand rods on sale at ~$40 to be excellent - great feel and performance. Relatively heavier and "clunkier" than my equivalent Daiwa black rods but totally acceptable when you think of the price point. 

    Id rather spend a bit more and get the good stuff but I know I'm careful with my gear. I have my cheaper gear for lending out to mates fishing with me who don't appreciate the gear as much as I do ☺️

  5. 49 minutes ago, kingie chaser said:

    Eva plastic?

    https://www.bunnings.com.au/1200-x-450mm-white-colour-plastic-liner_p2583492?store=7313&gclid=Cj0KCQiAqbyNBhC2ARIsALDwAsB8qNDfGG4teF1elxcOTngKR7uOcaJtuThCnw3LtnRV5chSpTF-q4AaAh0hEALw_wcB&gclsrc=aw.ds

     

    If it was big fish like tuna or kingfish etc maybe rather than trying to reline the inside of the bag what about simply wrapping the fish in some other material like hessian so as to keep the fins down?

    Great idea! I do like the affordability of Eva, maybe one that was smooth flat so that it would be easier to clean. Reckon it would be tough enough to resist sharp bits?

    Wrapping is also an option.

  6. I think gorilla tape on the corners sounds like an easy and effective way to bolster the corners/edges pre-emptively, so might do that. 

    Here is what vinyl layer looks like on the inside - a 0.98m X 0.98m sheet that is slid in to match the inside curvature. It's not attached or anything as I plan for it to come out when cleaning and drying, maybe roll it up when storing away so I can fold the bag. When inside the bag, it doesnt fold without putting some worrying creases on the vinyl so don't think I'll be folding the bag with vinyl inside. Seems like it will do the job - the only internal exposed are is the front and back.

    20211207_210829.jpg

  7. 10 minutes ago, frankS said:

    I guess the laminate will stiffen the bag so it will not fold up to store away when not being used. If by chance it is very flexible and does fold up then it's a great idea.

    Frank

    Good point, it is somewhat flexible but definitely adds stiffness - might have to cut in a certain way so that it can fold along a length easier - maybe like two long panels , one for each internal side.

  8. Hi all, I recently got a 1m long insulated fish catch bag (which you use for fish too long for a conventional eski) and want to reinforce the inside against spikes and sharp parts of fish that it will (hopefully!) hold.

    I went out to bunnings and got a sheet of clear vinyl used on tabletops which I think will so the job but keen to hear your experiences in using these bags, where the damage usually occurs, any tips etc... so that I can get the most out of this bag.

     

    Thanks!

    • Like 1
  9. Any of the reels suggested will be awesome for bream/flattie fishing and around the ~$120 mark. Save the left over for your next fishing purchase - e.g. you might seek out a kingfish setup as lots of people do!

  10. Hello Raiders, my interest in slow pitch jigging has been reinvigorated, maybe its the usual winter slow down both driving a slower bite and more time browsing youtube videos 😆

    Which leads me to my question - who can consistently catch fish using slow pitch jigging in Sydney inshore waters?

    I've had the random luck with casting slow pitch jigs (~20g in 20m) in Middle Harbour - mostly flathead now and again, baby snapper, rat kings (but only during Summer, when they'll take anything) and on two occasions, mulloway. Overall though, very low success rate.

    Some luck offshore in 30-40m waters but very hard to hit bottom with current/wind - though am keen to try again but this time with access to spotlock 😁

    Keen to hear if people have had success (particularly vertical slow pitch jigging rather than casting out) and details in Sydney inshore waters;

    - what you caught

    - general terrain/conditions

    - water depth

    - jig weight

    - vertical slow pitch or casting out

    - boat / land

    - season of the year if you remember!

    I'm hoping for lots of success stories. I know @DerekD has lots of luck land based... I'm also keen to try larger jigs in shallow water (80g-120g) and see if that does anything...

     

    thanks all!

     

     

     

     

     

     

  11. Good catch! What you can do is tie an extension rope between you and moorings if they are busting you off with mooring line underwater (just be mindful of swing and proximity to other boats/mooring lines)

  12. 9 hours ago, JamoDamo said:

    Its the LT (Light and tough Concept) which pretty much means what it says, heaps and heaps of drag for a small finesse "bream reel" . Also i've got $540 to invest in a setup with but i'd like to keep it under $400 as I still have a bunch of lures plastics and a bunch of other stuff that I need to restock with.

    I am looking to get my first magsealed bream reel so it seems this maybe the one i'm going with

    With that much to invest and given the general commentary around "you'll still be able to catch fish with most reels of all price ranges" (which I support btw), why not consider this: buy what you need now and save the rest for the next class of reel/rod? (An eventual outcome as you go on your fishing journey). E.g. get a decent reel for your bream fishing - something like a 1000/2000/2500 nasci would be light and very smooth (or even an exceler LT - very smooth for a cheaper reel) then save the big bucks for bigger reels / heavier rods when the time comes (e.g. heavy king setup) - I've found you can get away with cheaper reels on the lighter end but you need to spend more, relatively, on the heavier gear just due to the stresses and conditions it needs to face.

    • Like 4
  13. Usually 6 max for 2 people. I rinse, wipe down, inox spray then wipe all reels/rods - makes clean up a lot easier and less stuff in the way. And that's cause I carry pairs - so for me I'm actually bringing and using only 3x rods. I like that it makes me think about how I will fish and what I will use each for. I also have a couple of handlines permanently living on the boat. Don't ask how many rods I have off-boat!

  14. On 6/7/2021 at 6:06 PM, DerekD said:

    Hi Spud,

     I think I am pretty good at catching squid (see articles section in library for the post I put together) and have helped a fair few people over the years improve their catch rate. I've fished Middle Harbour for a long time too so the following is from personal experience.

    Firstly, I'm assuming you are fishing daylight hours so if you are getting a few in a couple of hours I'd say you are doing pretty well. I have several spots which produce reasonably consistently but I usually have to hit each one (and sometimes several) to get sufficient squid for a fishing session.

    Just some things to think about. Squid move around. 15 minutes could make all the difference between catching some and the dreaded donut. While I've heard of people who have found some locations where on a particular time of the tide their success rates goes up I haven't found one of these so called consistent spots yet. I also catch squid for fun so I'm not always desperate to catch them quickly.

    What is important is covering ground and effectively. When there are two of us on the boat we will cast in different directions (say one towards the shore and dropping it down the water column and the other parallel to the shore). Most importantly, when someone hooks up get a second jig very close to where you think the squid is. They often travel in twos and threes so you can usually pick up multiple squid. Seaweed in Middle harbour only seems to grow in the upper section of the water column (say top 3-5m). I find the edge where it stops growing then send long casts out parallel to the shore and a meter or so out from this line. I have some faster sinking (not to be confused with size) jigs if I need to cover ground quickly.

    The paternoster rig is another way of covering ground and you can send down multiple jigs. Do this on dusk with glow in the dark and your advantage increases. Spit bridge is a popular place for using this method and especially at night. Give some of the suggestions from the other Raiders above a try.

    If I'm fishing Middle harbour and really needed squid I'd hit a few shore based spots the night before and then zip lock bag them and put them in the fridge (not freezer). I'll try for fresh the next day but generally use the pre-caught ones first and if I don't get to the freshly caught ones I can save and freeze them for next time. This way I keep a rolling stock of pretty fresh squid.

    Regards,

    Derek

    Don't forget the luck factor - I've had the (dis)pleasure of being the other person when squidding off the boat with Derek and he seems to always pull up the squid when I'm drawing blanks.... 😛

  15. On 5/8/2021 at 4:26 AM, big Neil said:

    There are other members on Fishraider who share their expertise with others. That's one of the benefits to being a member. Derek is a little bit different in as much as he has an insatiable desire to be learning ALL THE TIME. Even more relative is the fact that he is the most generous person you will meet (EVER). He absolutely loves to pass on his knowledge and skills to others. Now that's not uncommon, teachers do it for a living...but they get paid to do it. Derek is quite satisfied to see the smile on his students face and the success when they achieve their objective.

    I'm glad that you had the benefit of his instruction fin fur, you will be a much improved angler because of it. Derek has helped me many times, in fact he continues to do so. I'm proud to call him a mate. bn

    Agreed!

×
×
  • Create New...