Jump to content

Stanfo

MEMBER
  • Posts

    38
  • Joined

  • Last visited

Contact Methods

  • Website URL
    http://

Profile Information

  • Location
    Coffs Harbour

Stanfo's Achievements

BREAM

BREAM (4/19)

0

Reputation

  1. Hi rockfisherman, I always remove the fuel line after flushing the motor and allow it to burn any fuel left in the carbies. After the motor dies, try restarting it with the choke on to use any remaining fuel. By doing this it always seems to start easier as there isn't stale fuel in the line next time you go boating. hope this helps Stanfo
  2. thanks for the replies raiders, the motor doesn't have a seperate trim switch on the motor so i think it must be the fuses/relays. i hope its not something more terminal
  3. Hi Raiders, tried to go fishing on the weekend but the trim and tilt on the motor carked it, just wouldn't respond. We put the boat back on the trailer and took the motor cover off and and found a black box between the two top cylinders (the motor is an evinrude 90 v4 from about 1986)inside that were box like fuses that clicked when we tried the trim button. Does this clicking meant there shot, if so will the local boat store have replacements and how much would they cost. if this isnt the problem any idea what else it could be? thanks in advance Stanfo
  4. Stanfo

    Boating Mishaps

    I was fishing with a mate down in the local river, the current was folwing pretty quickly, so the desicion made was to dump the sand anchor, this worked really well the boat stayed in place. the spot yielded no fish so we decided to move. so with the anchor rope tied to the rollock we set off. only got about three metres before our progress was haulted by an almighty jerk, thats right, id left the anchor out. DO'H. We were damn lucky, my boat is an old 6 foot fibreglass tender that is a little fragile at the best off times, i still wonder how the side was not ripped completely off. the moral of the story is always check to see if the anchor is in and dont be a fool like me
  5. Stanfo

    Zephyr Boats

    Hi raiders Sorry this post was hard to answer, we've got the boat and Im now are able to post a pic. We have got at a"zephyr" boat, and it seemed ok but I don't rcognise the name let alone their history or the build quality. So I was wondering if any raiders knew anything about them. The only clues I have is there was a South Australian flag on the sticker as part of the name sticker, and it looked similar to an Alison boat, high windscreen and a non raised cuddy cabin. The owner didn't know its history as a brand either. Any information welcomed cheers Lachlan EDIT: sorry guys I made it hard for you but Im hoping that by posting a pic, that may shead some light on what ive been babbling about. Sorry hoodlum92, I have searched the net and but have not yet found anything like it.
  6. Thanks for the help guys, I'll try to get some livies and see how that goes. The snag snorkelling sounds like a great idea but the water will have to warm up a bit because im a wuss. thanks again Lachlan
  7. Hi raiders, I have caught the mangrove jack bug. However dipite reading all the fishing literature surrouding them and I was wondering if you guys could please clear up a few areas surrounding the elusive jack. I fish a local river 10 mins south of Coffs Harbour and intend to fish the hours either side of sunset, is this an effective statergy or am I waisting my time, mainly due to it being August and still relitvely cold. My other query is how do I pick a likely snag for jacks, are there any things that I should be looking for? Thanks in advance Cheers Lachlan
  8. I'd love to come and in the same boat as hazza (pardon the pun), however Im in Coffs Harbour and doubt I can attend. Cheers Lachlan
  9. Stanfo

    Transom Testing

    Hi raiders, does any one know if there are any ways of testing for a soft floor and transom in a second hand boat. The reason I ask is that we are looking for a second hand glass boat and dont want to get stuck with a lemon that will cost the earth to get in working order. Cheers Lachlan
  10. If you dont want to weld it then there is a plastic skeg that is produced by blackfin, it maybe an option.
  11. Thanks for the replies Raiders the the rising sea levels joke was probably misplaced, so to recap the moon was probably closer to, and on the other side of the Earth resulting in a extream low tide. Did any other raiders notice this unusual phenomenon?
  12. If a king tide is a big high tide than what is an extream low one? The reason I ask is that on a visit to my local river this afternoon the tide was at least 1-1.5 m lower than it usually is. Not sure how it is in other places but this was freaky, my faverourite flatty spinning spots were all on dry land, I thought sea levels were rising. Any explanation would be greatly appreciated Cheers Stanfo
  13. Stanfo

    Engine Upgrade

    Hi Katari Unfortunatly i can't give you an accurite figue for the engine but PM huey, im sure he will be able to give you a quote and might do you a deal on an E-Tec at raider rates. Good luck Stanfo
  14. Stanfo

    Pine Creek

    Hi raiders just wondering if anyone has fished Pine or Bonville creek near Sawtell south of Coffs Harbour. Haven't fished there much and don't know of any good spots. All advice appreciated. Cheers Lachlan P.S. I'll be fishing from a boat
  15. Cheers Huey they want $4000 ono and I domt think that it is worth 5 grand
×
×
  • Create New...