Lowrance hds 5

[imgoin]

Hi all the other day while out fishing i some how managed to change the settings on my sonar it is now showing the bottom surface at the top of the screen read the owners manual a doesn't say anthing about this just wondering if anyone has had the same problem. Will add picture tonight as have to get the boat out of the garage to get pictures.

[mattyg_16]

Hey mate,

Not 100% sure but you may have turned bottom lock off? Or you have zoomed in therefore lost the bottom.

Matt

Edited January 10, 2013 by mattyg_16

[Geoff]

it is now showing the bottom surface at the top of the screen

Is the depth overlay data showing zero or an actual depth. If the overlay data is showing something other than zero , is the number increasing or decreasing reflecting the actual depth as you move along.

If you select the "Sonar" menu , the main menu has a number of drop down screens. Have a look through these , the problem is most likely in one of the settings.

Geoff

[Mr Pitt]

Hi mate im with mattyg as i had the same problem with my raymarine it was zoomed right in

[imgoin]

Thanks heaps guys will give it a go and see how i go

[imgoin]

Hi all had the boat out the other day and managed to fix it. The problem was i had adjusted the depth setting from auto to 250 once it was adjusted back to auto setting it is now working as it should thanks heaps for your repleys and help.