douglas Posted February 11, 2007 Share Posted February 11, 2007 Hello Just wondering if anyone knows the quickest and best way of attaching braid to flurocarbon Thanks Link to comment Share on other sites More sharing options...
KingsRule Posted February 11, 2007 Share Posted February 11, 2007 What stregnth leader- mainline are you using? I normally use 6lb braid - 10lb leader, tied together with a double uni knot, no problems so far:) Link to comment Share on other sites More sharing options...
Guest Posted February 11, 2007 Share Posted February 11, 2007 Hello Just wondering if anyone knows the quickest and best way of attaching braid to flurocarbon Thanks Double Uni Knot is the quickest and has stood the test of time. Albright is another you may wish to try . Check the Knots link at the top of the page. Cheers Stewy Link to comment Share on other sites More sharing options...
Guest rzep Posted February 11, 2007 Share Posted February 11, 2007 (edited) We are holding a knot workshop in March Click here for details. Edited February 11, 2007 by rzep Link to comment Share on other sites More sharing options...
GregL Posted February 14, 2007 Share Posted February 14, 2007 Hi Guys New to here but have been fishing a long time and have read this site lots. As they say a change is as good as a holiday! I like uni uni if they are similar in line thickness or will use a slim beauty knot if the leader is alot thicker. Here is a link and you can download the movie. http://www.midcurrent.com/articles/knots/slim_beauty.aspx Greg Link to comment Share on other sites More sharing options...
xceler8or Posted February 14, 2007 Share Posted February 14, 2007 Yeeeebah! Bring on the Knots & Rigging workshop Im a big fan of the uni knot myself: quick & easy but most importantly, reliable The 'Knots' link is very helpful with the animated instructions Link to comment Share on other sites More sharing options...
Guest danielinbyron Posted February 14, 2007 Share Posted February 14, 2007 i've gone back to double uni ..i do a 70 turn around the knees bimini ..then a double uni.... taking care that the braid pulls down evenly against the leader. Link to comment Share on other sites More sharing options...
kenmare Posted February 14, 2007 Share Posted February 14, 2007 (edited) Hi FishHard, Most knots that you use to join mono will work, except you need to keep in mind that braid is smaller diameter and more slippery than mono. So you need to at least double the turns you would use in mono when tying braid. I use the double albright myself (winding the braid both up and down), and find about seven or eight turns each way about right for the lines you're joining. I believe there is an article on this site which shows how it's tied. http://www.fishraider.com.au/articles/softplastics2/ Regards, Bob Edited February 15, 2007 by kenmare Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now