Armpits Posted December 5, 2017 Share Posted December 5, 2017 Hey guys, I have bought some soft plastics and have used it but never really looked up how to use them properly etc... so now I have abit of time to research I got a few things I like to know. 1) When rigging the soft plastics do I need a jig head? Or you don’t need to use one? If so, how would I go about doing so without a jig head? 2) What are some common and basic rig setup for soft plastic? 3) When casting the soft plastics out with a spinning reel. Do I just leave it out to sit or do I want to wind the soft plastic in slowly? Can anyone recommend me a technique for SP? Link to comment Share on other sites More sharing options...
rickmarlin62 Posted December 5, 2017 Share Posted December 5, 2017 get on youtube and have a look...SPs need to be moved..too hard to describe all facets but well covered in many tutorials on youtube...rick Link to comment Share on other sites More sharing options...
Armpits Posted December 6, 2017 Author Share Posted December 6, 2017 It’s really simple question. I have look on YouTube to all are using jig heads. Though my question above is do all soft plastics require a jig head? Or I don’t have to go buy one and use a different rig setup for it? Link to comment Share on other sites More sharing options...
Aardvarking Posted December 6, 2017 Share Posted December 6, 2017 I'm not sure what you mean by "do they require jigheads", what would the alternative be? Link to comment Share on other sites More sharing options...
Hooked-Up Posted December 6, 2017 Share Posted December 6, 2017 (edited) for casting yes you need jig heads, if your drifting in a boat you can use inline hook with paternoster rig, theres some american rigs too, wacky rig i think is one from memory. just checked and wacky is for lakes without current. Edited December 6, 2017 by Hooked-Up Link to comment Share on other sites More sharing options...
Pafisho08 Posted December 6, 2017 Share Posted December 6, 2017 Hi there Armpits Take a look at the SQUIDGES web site as there a load of good info on there video channel. Regds Bob Link to comment Share on other sites More sharing options...
rickmarlin62 Posted December 6, 2017 Share Posted December 6, 2017 I use a worm hook sometimes rigged with a small ball or bug sinker on a loop to fish in heavy cover for bass or cod..its a weedless rig...rick Link to comment Share on other sites More sharing options...
savit Posted December 6, 2017 Share Posted December 6, 2017 http://www.fishraider.com.au/article/fishing-soft-plastic-baits/ http://www.fishraider.com.au/article/fishing-soft-plastic-baits-pt-2/ http://www.fishraider.com.au/article/fishing-soft-plastic-baits-pt-3/ Link to comment Share on other sites More sharing options...
frankS Posted December 6, 2017 Share Posted December 6, 2017 Armpits. It's not as simple a question as you seem to think. There are many circumstances conditions etc where you don't need a jighead for soft plastics, there are plenty of plastics that are heavy enough to cast a fair distance without additional weight then there is the style of fishing you are doing and the gear you are using. It's too varied a question to answer with a couple of internet posts, think yourself lucky you have so many experienced fisho's trying to help you with your questions. When I started learning the art of catching fish there was no internet or such and fishing mags etc were expensive and usually well out of date before they were released. Time will answer some of what you want to learn, you will NEVER stop learning, I have been at it 60 odd years and I am still learning. Frank Link to comment Share on other sites More sharing options...
Armpits Posted December 7, 2017 Author Share Posted December 7, 2017 (edited) Well I am just starting out and don’t need to know the advanced stuff yet. I just want to know the basics. I know soft plastics are used with jig heads from researching but I also want to know if one does not have a jig head can you rig it up still? If so, how? Would I have to add a sinker or something? Can I just have a small sinker above the hook just like a jig head. Please recommend me a way that is what my question was, sorry if it did not make sense. Edited December 7, 2017 by Armpits Link to comment Share on other sites More sharing options...
BIGG DADDA TREVS Posted December 7, 2017 Share Posted December 7, 2017 If you're starting out a really good species to target is flathead. They are pretty easy to catch and the techniques is not super critical. Just cast out and let it sink to the bottom, lift rod up and let ink again, continue until you get kit and set the hook hard Best way to learn is to find someone to go and fish with for a session or two, usually you will figure out the rest yourself from time but fishraider is always hear to help. Good luck! Link to comment Share on other sites More sharing options...
macca02 Posted December 7, 2017 Share Posted December 7, 2017 2 hours ago, Armpits said: Well I am just starting out and don’t need to know the advanced stuff yet. I just want to know the basics. I know soft plastics are used with jig heads from researching but I also want to know if one does not have a jig head can you rig it up still? If so, how? Would I have to add a sinker or something? Can I just have a small sinker above the hook just like a jig head. Please recommend me a way that is what my question was, sorry if it did not make sense. Yeah pretty much - I've done it before, thread a plastic on a long shank hook and have a ball sink running down to it. Better even would be to fix the ball sinker down near the hook so it doesn't move up the line. It can be done, I've done it before as a muck around/experiment and got a flathead doing so. That all being said, just get some jigheads - its much easier lol Link to comment Share on other sites More sharing options...
mrsswordfisherman Posted December 7, 2017 Share Posted December 7, 2017 Thanks @savit for putting links Link to comment Share on other sites More sharing options...
savit Posted December 8, 2017 Share Posted December 8, 2017 19 hours ago, mrsswordfisherman said: Thanks @savit for putting links Interesting articles, Donna. Plenty of useful info for beginners and for those with experience. Link to comment Share on other sites More sharing options...
nutsaboutfishing Posted December 8, 2017 Share Posted December 8, 2017 PM sent Link to comment Share on other sites More sharing options...
rickmarlin62 Posted December 16, 2017 Share Posted December 16, 2017 Heres how i rig a simple sinker hook weedless rig for bass n bream in tough territory Link to comment Share on other sites More sharing options...
Flattiefisher Posted February 11, 2018 Share Posted February 11, 2018 You do not need a jig head for soft plastics. Although I fish with jig heads there are different ways. Also you don't need to rig the plastic weed less. Putting some gulp on a paternoster rig and casting it out at the beach is great. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now