![](http://fishraider-ips-assets.s3-ap-southeast-2.amazonaws.com/set_resources_17/84c1e40ea0e759e3f1505eb1788ddf3c_pattern.png)
![](http://fishraider-ips-assets.s3-ap-southeast-2.amazonaws.com/set_resources_17/84c1e40ea0e759e3f1505eb1788ddf3c_default_photo.png)
Juggs
-
Posts
359 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Fishing Tips, Advice and Articles
Blogs
Store
Posts posted by Juggs
-
-
A dealer will charge 1k plus depending on the install and steering type to be fitted
You would want to be very certain of your abilities to weld as you could easily end up with a pile of scrap
It's not just about good welds it's also about heat Managment and not distorting the panels
You also have to manufacture jigs and a holding jig which ups your costs
-
Also add inertia of the fish, water pressure on the line in the water to the mix
So 1/3 of the rating of the rod is generally your drag setting
-
6kg is ample for beach fishing bream whiting flathead smaller Jews etc
Heavier lures baits etc or abraisoon resistance off the rocks go to 10kg
Heavy Rock fishing 15kg
A quality custom 9 foot spin stick with 6kg is my most used all rounder
-
Neighbour just picked up a v8. Petrol about about 10 years old I'm guessing the grand Cherokee would have to go look
33l per hundred towing a 1200kg 20ft van
Previous owner had driven on the beach and all the front end was rooted could get front brake hubs off etc
-
And if you have everything prepared its only a ten minute job per side
One tip is use plastic bags over your hands instead of gloves and just throw them away afterwards
-
their current malaysian tld 15s and 25s are no better either
had one sieze new out of box on its first fish
-
I don't know why they can't construct half at a time like they did at Tunks.
because it would cost more, double handling etc
i have a colleague involved with pontoons and the like and they defiantly prefer summer when installed marine structures
concrete also cures faster when the water is 20 instead of 14 degrees
-
yes i bought new hubs from a trailer parts store and one of them made it 200m down the road before it collapsed
i was blamed for the fault
ive never had a timken bearing fail on 13 odd trailers
-
never had a issue with timkin bearings
-
spot filled
-
Mate,
Towing a 700-800kg formosa with a BA Falcon with no problem. would agree with the others. something wrong with the car. went down to JB at average 95k/h with no issues. i noted though fuel quality had a significant impact. went down on vpower which was great. came back up on the local stuff and the car struggled.
cheers.
Dan
which formosa is it, hey have some very nice designs
formosa dont build a hull under 520kg
hull 520
trailer 270ish
outboard 120ish
fuel 70l so 60kg
anchor chain rope 40g
radios sounders batterys saftery gear 100kg
so more likley 1100-1200kg
and to the op dont tow in 5th you will come to a hill load the engine and box up and twist the overdrive off the side of the box
i currently have a dual cab bt-50 automatic 4x4 it towed my old boat 600kg and you didn tknow it was there
the new boat is a bit bgger 1100kg and more wind resistance but sits on 100 uphill easily
-
Going out this Sunday as it looks like the winds quieting down a little
Send a pm if interested only one person I'm not a charter boat
-
I can show you how to do a basic cast etc
My only experience is Pelagius on fly
Best 6kg dolphin fish on a 6wt
-
Most sounders wont work correctly out of water due to the air gap between transducer and the ground. surprised you say it worked good out of water before.
my furuno 585 wont read anything out of the water
it also damages the crystal embedded in the epoxy as it doesnt have water around it to cool it
-
nice fish guys
do you troll the squid dead or alive
and rig advice would be awesome thanks, i assume 60 pound to two 5/0 or 6/0 circles ?
-
are you running the sounder out of the water?
-
Where is the grease going if people have to give them a pump every trip or two
They dont create a black hole and the grease just disappears
You pack the bearing and partly fill the hub that's it, all they are doing is filling the hub with grease and pushing the old grease to the back of the inside bearing
Only the outside bearing gets any benefit
-
they are not struggling for air in th emorning, as you are adding air all night
they are struggling to deal with the waste product in the water, pee poop food they regurgitate
only solution is more water
-
dont put more hp then max on the back, its against the law to exceed the manufacturers compliance plate, and now a chargeable offense if caught
remember in your licence test " your the skipper your responsible"
"Registration of a vessel may be cancelled or suspended if the vessel has become unsafe" or unseaworthy (exceeded the compliance plate makes the vessel unseaworthy)
look at the cubic capacity of the 20 versus the 25
yamaha 20 395 cc Recommended Max RPM 5500-6000
yamaha 25 395 cc Recommended Max RPM 5500-6000
same cc and rpm, so must be in the jetting and exhaust system or compression
the 30 then jumps to 496cc
find the 25 with the biggest cc as that is where torque comes from
-
Old school I know
But I live my Abu 1600 and 2500's no fancy magnet this or that just simple and quality
-
http://i13.photobucket.com/albums/a272/LUKKAT/stacer.jpg
495 stacer with 96 model johnson 70 and tohatsu aux
-
Hey Raiders,
What weight can an 80lb thrust minn kota move effectively?
Cant find this info anywhere!
Thanks guys
work out what a 17-18ft skeeter weighs and theres your answer
it wont allow for wind etc if you have a higher sided boat though
-
Spot still available
-
Neighbour has the 4x4 great wall it's about 2 years old
It has rust comming out between the cab and tray and the transfer box seized te first time he used 4x4
He tows a one tonne loaded bike trailer and sits on 100 ok but big hills you have to drop gears early and keep the revs up
I have a ht-50 dual can 4x4 auto and went away with him towing my camper trailer about 1500kg loaded and comming up mooney mooney I passed him like he was standing still
Our insurance company at work will not cover them for rep use due to the poor cash ratings
As a comparison I was offered 22k trade in on a new bt-50
Mine is two years old and has 120,000 km
IDEAS ON MOTOR PLEASE
in Boating
Posted
I have a 96 model 70hp johnson
Electric choke and modern guages with alarms etc
I'd be lucky to get 2500-3000 for it if I sold it
Just food for thought