GregL Posted November 1, 2008 Share Posted November 1, 2008 Mine, Gulp! packets and the perferated bit where your ment to tear off. WHY are they all buggered and then you have to get the scissors out and cut right along the edge of the seal section just to get it opened? Greg ps best plastics tho! Link to comment Share on other sites More sharing options...
Josh88 Posted November 1, 2008 Share Posted November 1, 2008 Yes thats pretty annoying. Also when lures you buy don't fit in tackle boxes you already have, uncalled for tangles in the lines which leave you wondering how on earth it happened. Sure there are many more though.... Link to comment Share on other sites More sharing options...
hottyscotty Posted November 1, 2008 Share Posted November 1, 2008 sabiki rigs...can never put it back together the way i opened it. in the end if it gets tabgled, i just open a new one and buy more Link to comment Share on other sites More sharing options...
Red Posted November 1, 2008 Share Posted November 1, 2008 Good topic Greg My tackle hate is when a company gets their reels made in China yet still command "Made in Japan" prices. Man, that's so not cool Cheers Red Link to comment Share on other sites More sharing options...
The Iceman Posted November 1, 2008 Share Posted November 1, 2008 Must have expensive jap lures and then working out a cheaper lure is just as effective Link to comment Share on other sites More sharing options...
Dreamtime Posted November 1, 2008 Share Posted November 1, 2008 It's got to be the lure that no matter how many times you "tune" it, it still wont swim true Link to comment Share on other sites More sharing options...
donjuarez Posted November 1, 2008 Share Posted November 1, 2008 The feeling that you can never have enough.. and always want more despite already having brand spanking new unused rods and reels in you're aresenal... Link to comment Share on other sites More sharing options...
Steve07 Posted November 1, 2008 Share Posted November 1, 2008 Wind knots or tangles in braid while flicking lure's around,very annoying especially when you have to loose 30 or 40metre's of line off the spool when it happens, it just tightens up & you can never untangle it. Link to comment Share on other sites More sharing options...
1975 Posted November 1, 2008 Share Posted November 1, 2008 snaged Jap lure first cast BigW lure lasts the whole season Link to comment Share on other sites More sharing options...
Hodgey Posted November 1, 2008 Share Posted November 1, 2008 Little trebles on poppers + fat fingers = blood Inconsistency in soft plastic colors by manufacturers Manufacturer making your favourite surface lure obsolete Hodgey Link to comment Share on other sites More sharing options...
ORES Posted November 1, 2008 Share Posted November 1, 2008 F#@kIN TANGLES WHEN ITS F@#KIN GOING OFF OUT THERE...................... Link to comment Share on other sites More sharing options...
arpie Posted November 1, 2008 Share Posted November 1, 2008 ......Manufacturer making your favourite surface lure obsolete...... Now I wonder which one that would be Hodgey?? Bet I know!!! 1. Definitely, losing an expensive lure to a fish 2. Not catching when all around you are ....... even when using an identical rig & lure! 3. Knots in braid - who has the time to untangle them?? 4. buying some tackle, then finding you already had some underneath something else! Roberta Link to comment Share on other sites More sharing options...
yakfishing Posted November 1, 2008 Share Posted November 1, 2008 cheap fishing line. Never again Expensive gear and no money People who can afford expensive gear then don't use it!!! Too many lures to choose from Hooks.... When they are imbedded in your leg The aforementioned gulp packets Wind knots and unexplained tangles Explained tangles Watching fish ignore your offerings And worst of all - a lost fish due to faulty tackle Link to comment Share on other sites More sharing options...
Spoont Posted November 1, 2008 Share Posted November 1, 2008 (edited) Finally picking up the Tiagra that you have worked soo much overtime to afford way back when fuel was under a dollar. You take it out of the box, admire it, stroke it, you even give it bit of a caress. You maticulously pay attention to how much tension is on the line while you spool it up, you lay the line perfectly so the reel is full without a strand of line out of place. You mount the reel on you favourite 37kg custom stick, ONLY TO REALISE THAT YOU DIDNT PUT THE BLOODY BOLTS IN FOR THE ROD LOCK Decision time, do you just say stuff it and go without? Of course you don't, it has to be perfect so you wind the line off and do it all over again. About an hour later and with forearms Arnie would be proud of, she goes in the cover to be stored for what will most likely be months because you cant afford the fuel to get out to the shelf. Thats what i hate Edited November 1, 2008 by Sponot Link to comment Share on other sites More sharing options...
aussie big bob Posted November 1, 2008 Share Posted November 1, 2008 (edited) ......Manufacturer making your favourite surface lure obsolete...... Now I wonder which one that would be Hodgey?? Bet I know!!! 1. Definitely, losing an expensive lure to a fish 2. Not catching when all around you are ....... even when using an identical rig & lure! 3. Knots in braid - who has the time to untangle them?? 4. buying some tackle, then finding you already had some underneath something else! Roberta Roberta Im with you on number 4 as i seem to do this quite offten. cheers bob Finally picking up the Tiagra that you have worked soo much overtime to afford way back when fuel was under a dollar. You take it out of the box, admire it, stroke it, you even give it bit of a caress. You maticulously pay attention to how much tension is on the line while you spool it up, you lay the line perfectly so the reel is full without a strand of line out of place. You mount the reel on you favourite 37kg custom stick, ONLY TO REALISE THAT YOU DIDNT PUT THE BLOODY BOLTS IN FOR THE ROD LOCK Decision time, do you just say stuff it and go without? Of course you don't, it has to be perfect so you wind the line off and do it all over again. About an hour later and with forearms Arnie would be proud of, she goes in the cover to be stored for what will most likely be months because you cant afford the fuel to get out to the shelf. Thats what i hate Sponot BLOODY BOLTS IN FOR THE ROD LOCK I thought this was something that i just did so i am glad to find out its not. Its just sad that you had to go through the pain to make me feel better cheers bob Edited November 1, 2008 by aussie big bob Link to comment Share on other sites More sharing options...
GregL Posted November 2, 2008 Author Share Posted November 2, 2008 Funny! I read each one and feel all your pain as I recon I hate them all too! But Sponot, that's gold! I spooled 2 reels up before putting them on the rods....... "ANGER" LOL Finally picking up the Tiagra that you have worked soo much overtime to afford way back when fuel was under a dollar. You take it out of the box, admire it, stroke it, you even give it bit of a caress. You maticulously pay attention to how much tension is on the line while you spool it up, you lay the line perfectly so the reel is full without a strand of line out of place. You mount the reel on you favourite 37kg custom stick, ONLY TO REALISE THAT YOU DIDNT PUT THE BLOODY BOLTS IN FOR THE ROD LOCK Decision time, do you just say stuff it and go without? Of course you don't, it has to be perfect so you wind the line off and do it all over again. About an hour later and with forearms Arnie would be proud of, she goes in the cover to be stored for what will most likely be months because you cant afford the fuel to get out to the shelf. Thats what i hate Link to comment Share on other sites More sharing options...
justinp Posted November 2, 2008 Share Posted November 2, 2008 Tying a leader knot in bloody windy conditions, knowing full well u need glasses, finish a perfect knot and then trim the ends, (oops), trimmed the wrong line, really gets my goat and Ive done it on more that one occasion Link to comment Share on other sites More sharing options...
Le Pasha Posted November 2, 2008 Share Posted November 2, 2008 SABIKI JIGS!!!!!!!!!!! Link to comment Share on other sites More sharing options...
Spoont Posted November 2, 2008 Share Posted November 2, 2008 I have a feeling that now I have admitted to being a dork there will be others to follow. I am sure I am not Robinson Cruso on this one Link to comment Share on other sites More sharing options...
MightyBites Posted November 2, 2008 Share Posted November 2, 2008 I have a feeling that now I have admitted to being a dork there will be others to follow. I am sure I am not Robinson Cruso on this one Your not alone brother.. Its been done before! You had me in stiches for hours..! Link to comment Share on other sites More sharing options...
gretsch Posted November 2, 2008 Share Posted November 2, 2008 1. Kings thieving your high end rods and reels and you can't blame anyone but the rod holder manufacturer and they call you a liar. 2. Corrosion 3. Jackets Link to comment Share on other sites More sharing options...
Farma Posted November 2, 2008 Share Posted November 2, 2008 The hook on a jig head snapping when you hook a great fish Link to comment Share on other sites More sharing options...
snag Posted November 3, 2008 Share Posted November 3, 2008 (edited) Mine, Gulp! packets and the perferated bit where your ment to tear off. WHY are they all buggered and then you have to get the scissors out and cut right along the edge of the seal section just to get it opened? Greg ps best plastics tho! Greg they gave you all the dodgy ones Hang on they gave me them too By the way when do we see pic's of the new beast? Edited November 3, 2008 by snag Link to comment Share on other sites More sharing options...
Hodgey Posted November 3, 2008 Share Posted November 3, 2008 Try here snag: New boat Hodgey Link to comment Share on other sites More sharing options...
donjuarez Posted November 3, 2008 Share Posted November 3, 2008 My favourite sound "ZZZZZZZZ" followed by my most hated sound "Ping" and the sinking feeling that follows... why o why didn't I just re-tie my leader! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now