Jump to content

Fun2fish

MEMBER
 View Profile  See their activity

  • Posts

    117

  • Joined

  • Last visited

 Content Type 

Everything posted by Fun2fish

  1. Fun2fish
    I think I'm wrong about it being a rms thing so will service 1 I have more Xmas vouchers for something else maybe new tackle
  2. Fun2fish
    If you go to rms site inflatable jackets are only good for 10years
  3. Fun2fish
    Hi need a new inflatable lifejacket are there any to avoid thanks
  4. Fun2fish
    Hey guys I live at berowra Cowan stn is nowhere near the water.if you want to fish the hawkesbury best stn is brooklyn
  5. Fun2fish
    Good times to remember I still have great memories of taking my 2 girls fishing when they were young
  6. Fun2fish
    Hi had the same thought it was no spark mechanic yesterday found out it was a faulty fuel pump disconnect pump from motor squeeze primer bulb if fuel comes out back of pump that's probably your problem. As a bonus bagged out on flathead today
  7. Fun2fish
    I've had toeys that were 36 years old should be a winner
  8. Fun2fish
    It's crazy the prices they are charging I worked with a bloke about 3 yrs ago got a new fitted tohatsu for around 9k ok was 2 stroke but 15k for a midrange outboard is b.s..7k to rebuild a basic motor is also b.s. try somewhere else mate.ibought a used tohatsu 40 about 5 yrs ago from a shop at kurri kurri for $800 still going I can't work out why itso cheap.look around.
  9. Fun2fish
    When I got my new trailer I asked about steps they told me to just use the spare wheel which is attached to winch post works fine
  10. Fun2fish
    Mate that is reasonable amount for a high end reel.i had a Shimano charter special that was about 3 yrs old serviced cost around $20 less than the reel.next time around got bearings from Shimano to do myself still cost small fortune last time it started to play up was going to throw away gave it away instead bloody ridiculous
  11. Fun2fish
    Yeah put stainless steel ones in surprised there not standard
  12. Fun2fish
    Hi I had to get a new trailer a few years ago and wasn't sure about weight so got a braked one.now I wish I had of done weighbridge to see if I needed brakes as cost of reform has doubled + need inspection every year .I put a post up recently about pads falling apart even though trailer only about 3 years old worth checking anyway
  13. Fun2fish
    Hi I have mc40 so not sure if connection the same to remove top part of selector shaft from bottom part mine just has a pin you knock out have you tried moving selector on motor(not control box) and See what happens may be something obvious
  14. Fun2fish
    Hi all I always take chicken for bait normally covered in garlic or parmesan cheese also a good bait for bream and snapper.as for the price it's cheaper than Phillies and about a third of good prawns even cheaper when you take 1 breast from the dinner menu
  15. Fun2fish
    May be as simple as a head gasket if you decide to take head off spray bolts with a penetrating oil for a few days before you try anything it's not that hard to do if you can use basic tools another motor is expensive
  16. Fun2fish
    Hey mate make sure choke working could be stuck on may be worth getting clean petrol if you don't no how old it is new plugs wouldn't hurt either as well as cleaning replacing filter
  17. Fun2fish
    So decided time to do annual wheel bearing change trailer is 3 years old so wasn't expecting any hassle.turns out it was fitted with standard pads not marine I don't no if this is a regular thing but not ideal.1 pad had completely lost the actual pad part they all looked like they he'd been under water for ages trailer all ways washed down have swapped for marine ones hopefully better I'll try to take a picture cheers
  18. Fun2fish
    Congratulations always good when a plan comes together I hope to go better on Jews and kingies Kkmyself this summer .only problem I love a feed of flathead so I can get impatient keep up the great fishing
  19. Fun2fish
    Mate I would be surprised if you can't fix that if only parts needed. I had to replace my trailer about 3 years ago I went with sales trailers I won't say they are the best but good value as my boat is not worth a lot.no problems with rust at all but I do give it a good hosedown each use no problem with lights but they did use cheap bearings
  20. Fun2fish
    So I know blue spots live in deeper water but I always get a bit of a surprise when they chase a hooked fish to the surface. Makes me wonder about inshore flatties where we usually fish lures on the bottom would a midsurface work in a few metres
  21. Fun2fish
    Hi all went out 5,30 start for blue spots a bit of moving around till I found some legal fish kept about 7 for family and let heaps go as I prefer to keep mid size around 40 to 50 cm good news is surface action was around warmer water not far off cheers
  22. Fun2fish
    Mouth of hawkesbury I've seen up to 10 during the week they are prawning everyone has to make a living
  23. Fun2fish
    I know you should make sure impeller is installed on proper direction but wouldn't rotation place blades correctly if you bugger it up
  24. Fun2fish
    Are you getting steam from relief vents had that with my motor was a blown head gasket. I'm trying to see about a fix for small hole in block where gasket blew but saying that motor running fine just the steam at idle a concern
  25. Fun2fish

    Alloy welding

    Fun2fish posted a topic in Boating

    Hi all looking for advice about welding small hole between water galleys in outboard block surface. has anyone had this done or used j b weld or similar thanks
×
×
  • Create New...