The Iceman
-
Posts
1,851 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Events
Fishing Tips, Advice and Articles
Blogs
Store
Everything posted by The Iceman
-
Im thinking if getting a couple of TN50s for bream I reckon an ayu and a gold one would cover most situations
-
I currently have a freshwater MG bowmount on my tinny with an anode on the shaft its always washed with fresh water after use and have no signs of corrosion I used to have a freshwater MK transom mount which didnt have an anode was also washed after every use and showed no signs of any corrosion I had that motor for about 4 years
-
I use 60lb mono on my small one for bream and bass lures as well as SPs and for the big one I use the green cord which is rated to 275lbs
-
You might want to look at the stessl truck 5.2 as well Peter
-
My advice for the winery there is try camden gold nice drop and comes in 2lt goons
-
Maybe the bridge across the nepean at cobbity
-
Its not unusual to get bream and reasonable reddies on small slices if you let them drop under the tailor schools I would rather get them than the tailor unless the tailor are big
-
There is campbelltown produce store on Blaxland road that sells chook pellets by the kg thats not to expensive I used to get mine there when I used to bait fish
-
Nice fish Paul Im certain we can beat the record a little later in the year you nearly did not so long ago
-
Will tieing a sinker on the line take out the twists as well
-
I had a 30lb endura for about 4yrs and it was only used in the salt never had any trouble at all with it all it got was a hose down after use and I didnt have an anode either sold it after I got a bowmount
-
The shop looks good wish I could have spent more time there but time was limited It was also good to meet you Rick as well as Robbo and Mick The apparel wasnt bad either and yes I did spend more than I was going to
-
You would think that the prop shaft on all minkotas would be the same dia and thread therefore the prop shaft anode would fit all of them if not you would think that they would have a prop shaft anode to suit all their motors
-
A shaft anode on a composite shaft is a waste of time you will not have a corrosion problem there unless it is a metal shaft like a motorguide What you want if you get a composite shaft is a propnut anode which are available from minkota
-
I fish St Georges Basin a fair bit and the fishing has certainly improved there as well
-
Id be more worried about getting covered in whale snot
-
Thats a good price ozy what amp hour is it
-
Im with nrma I must have been lucky the guy I spoke to actually knew about boats I had to make a claim when someone ran into the back of my trailer writing it off as well as the transducer and prop took it all down to Hunts marine they organised everything and it all went smoothly cant ask for more than that
-
You can get marine grade wire at BIAS the difference is that it is tinned
-
ABSOLUTLY AWSOME
-
Not sure when we are going to do it but I will post a report its depending on the weather and the missus
-
Narra I would go to boat sites and do a comparison betwwen your boat and their boats that are the same and check the recommended HP for their boats and work from there
-
Tom and I were just organising a trip out to the islands off Port Kembla to do that sort of fishing while driving home from the social on sunday his boat is perfect for it 435 stessl angler 40hp honda
-
I use a SFS stella matched to a 10 year old 1000 symetre and squidgy spin matched to new 1500 sedona
-
Good stuff Jorg :thumbsup: congrats on the sponsership it will certainly be quick trips between fishing spots with that 75 on the back :ohyeh: