DerekD Posted September 21, 2022 Share Posted September 21, 2022 (edited) Blackfish (Luderick) fishing another (2) way(s). It also works for other weed eating species such as drummer. When I take a newbie fishing, very often we start with blackfish. They are all around the harbour and can be caught year round consistently. I have some reliable locations for cabbage weed (not sharing but I’ll make suggestions about what to look for). It is a great visual way of fishing as you can watch the float go down and react accordingly. They put up a nice little fight during which I can explain the notion of playing a fish. They are also a beautiful fish with those stripes and light sheen of purple. Please note that this article is not meant as disrespect to the traditional way of chasing of blackfish with long rods and centerpin reels but more of a way of opening people’s eyes to other ways of doing it. On a side note there are excellent articles on this topic on this site already but I’d like to add to the pool of knowledge. For a more detailed article see: I sometimes hear about people wanting to give luderick fishing a try but then raise concerns about having to buy new gear for something they may not really get into. The problem is most of what they have probably heard is about the traditional way of doing it. The great thing about the traditionalists in life is they are using methods which through practice and repetition and learning have had most of the kinks worked out of them. They are using a system which has been refined till the point it has been optimised for what it needs to do. The problem with this is that you might miss opportunities that arise due to changing circumstances such as equipment improvements. The other issue is that people who want to dip a toe in the water end up having to buy specialist gear because they are told it is the ONLY way to do it and it can end up being a waste of money or restrictive for those on a budget. One of the advantages the long rods have is it is a little easier to set the depth as you have a lot of line out to play with. It is also argued that the extra length helps keep the fish away from structure. Another comment I’ve heard is that you can feed line out and bring it back in by winding the centerpin reel backwards or forwards as the fight requires. While they might be fair comments I don’t think I’ve ever felt disadvantaged fishing for this species with spinning gear instead of the traditional outfits. I’ve worked out some ways of fishing for this species with spinning gear or fly rods which allows you to get out there and start catching them with minimal outlay (under $25 if you already have a light spinning outfit). If you get more and more into it then feel free to try the traditional way but if you want to try it to see if you like it then I hope the following helps you. Before I go into how I do it think about what you are actually trying to do with the gear. At its simplest we are trying to put a bait (usually cabbage weed or green weed) in the strike zone in such a way that firstly it is held at the desired depth. Secondly, the rig needs to be balanced so that when the fish takes the bait it feels minimal resistance and won’t spit the bait. Thirdly, that you have a good indication as to when to strike as generally I find they won’t hook themselves. The depth can be adjusted by using a float stopper and the other two goals can be achieved with a properly weighted blackfish float. This is my checklist for the gear required assuming you already have a 2-4kg outfit with some monofilament line floating around. Blackfish float $6-8, Floatstops (silicon rubber – get the smallest ones you can which won’t pass through the guides on the float but can pass through the rod guides) $3 Sinkers (will take some experimentation to find what combination works best to have the float only slightly positively buoyant) $3 Swivels (optional depending on how you rig your sinkers) $3 Hooks (Gamakatsu Panfish – recommend size #6 but can go size #4 if chasing bigger fish or size #8 as required) $6 Line you should already have. Suggest 8lb for the mainline and maybe 6lb (0.2mm diameter or less) for a leader if the fish are bite shy. This is how we set it up. I have a spool filled with 8lb clear mono for my fishing but if you only have braid on your rod then you could put 4m to 8m of 8lb mono as a leader (depending on the depth you are fishing) and then the rest of the rig is the same. The lovely thing about this approach is that if you decide down the track to get the traditional long rod and centerpin reel you already have most of the terminal tackle you will need rather than starting again. The reason I use mono at the working end is that the silicone float stops grab quite nicely on the mono and usually stay where you put them. The float stop is what allows us to use a spinning outfit. Ideally the float stop can pass through the guides. This is how we put a float stop on the line. As I have a dedicated spool I leave my float stop permanently on the line. A couple of additional notes to this rig. One of my friends likes to use something called a waggler float which is fixed to the line at one end only. The advantage with this is that it is less prone to having the line wrap around the float when casting. Personally I'm not a big fan of crimp on splitshot sinkers as they can potentially damage the line when being crimped on. The advantage of these sinkers is they allow you to make minor adjustments to the buoyancy of the outfit. In my case I've taken the time to find sinkers which match almost perfectly to the floats I use to give me that slightly positive floatation. The swivel rig has the advantage in that you can downsize the leader diameter if the fish are getting spooked. @wazatherfisherman through years of trial and error worked out the sweetspot was a line diameter of 0.2mm or less. If you find yourself busted off you will generally only have to re-tie from the swivel down to the hook. Gets you fishing quicker. The rest of the gear to consider bringing along for your blackfish expedition Ziplock bag or container for cabbage/green weed when you go to your weed location. Cutting board and knife to cut weed into small pieces - big enough to get the smell into the water but small enough that it is a struggle to eat it so your bait becomes the focus point. Bucket for sand/burley and slightly moist sand - mix the cut weed into this. Recommend large spoon or similar for flinging sand - saves getting your hands sandy and having to wash them each time you throw out some burley. Recommend a second larger bucket to keep your odds and ends in and for water to wash hands As to where to find the weed: Cabbage weed is found at inter-tidal zones or the waterline of floating structures. Seems to need to be close to both air and salt water so where the ocean swells wash over rocks is a great place to start looking. You will also find it growing in shallow pools in these areas. To use it I get a piece of say 3cm x 1cm then either roll it up or fold it up into a small bundle which I then ease onto the hook. Blackfish have small mouths so I want them to be able to eat it in one bite. Here are some examples of what it looks like: Green/string weed is often found at points where there is nutrient rich run off such as drain outlets. I ease it into long strands and then put the hook halfway along and then weave each half over the hook. Here is what it looks like: Fly rod outfit and artificial flies. It turns out that blackfish will take a well made fly. I have several fly rods and with a bit of trial and error worked out how to do pretty well at this. My go to outfit is a 7 weight 9 foot flyrod with a floating fly line. I found that an intermediate fly line would drag down my strike indicator. You can pretty well use any weight fly rod (e.g. 5 to 9 weight) with a floating line as all the critical adjustments are made at the working end (leader, tippet, fly and strike indicator) to suit the conditions. I like a tapered leader as I need the thicker part of the line on which to fasten the strike indicator. I prefer weighted flies as the unweighted ones take a little too long to get into the strike zone. A very small split shot could be used near the fly in lieu of a weighted fly. The first challenge I had was to solve the strike indicator issue. There are foam ones you can stick on the line but the glue diminishes as you slide it up and down the line to suit the depths. There are commercially made ones (the green/red/orange/yellow ones in photo below) but I found the thick O-rings had a tendency to kink the line. My solution was to hop on ebay and find o-rings with a 5mm inner diameter and an 8mm outer diameter. I then get about 4 to 5cm of strike indicator yarn and feed it halfway through the O-ring and then lash it it with 50lb braid. The finished product can be seen in the photo below along with the wet and dry versions of the fly I'm using. To fasten them to the fly line I double the leader and push the loop through the o-ring and then over the strike yarn and pull both ends of the mono. This will kink the o-ring instead of the line. The friction between the O-ring rubber and the line locks it into place. The strike indicator will get soaked after a while so every now and then I dry it out with some false casts and then apply a floatant. I like Loon Outdoors Lochsa in the black bottle. A drop or two worked into the indicator with your fingers will do the job. I can put on a tippet of several feet to suit the location I'm at. I join it to the leader with a uni to uni knot. I usually have a spool of 8lb and 10lb fluorocarbon in the tackle bag to use as leader depending on the location. The result of a successful session with the fly rod. Please note that while burley helps it is not critical. This means you can head out and start catching with minimal preparation. If you can find the blackfish then they will take the fly without burley. I've had sessions of close to 10 blackfish caught without burley and many were legal. My biggest blackfish to date was 44cm on fly without burley and I'm aware of others doing even better using the fly rod approach. On a cheeky side note: I realised that I wasn't quite practicing what I preach. I say you don't need a super long rod and centerpin reel to chase blackfish but technically that is what I am doing with my fly outfit. Edited October 22, 2022 by DerekD 14 6 Link to comment Share on other sites More sharing options...
Green Hornet Posted September 22, 2022 Share Posted September 22, 2022 Great, informative write up @DerekD. For those of us that enjoy luderick on fly, Dizzy Scent is now selling a weed scent. I’ve been trialling it for a while now and firmly believe its improving my catch rate. I’m not getting more “downs”, but find with the scent added, fish don’t reject the fly as quick. 3 Link to comment Share on other sites More sharing options...
Rebel Posted September 22, 2022 Share Posted September 22, 2022 (edited) Super in depth story. You forgot one thing. The Green Peas. Cheers. Edited September 22, 2022 by Rebel 3 Link to comment Share on other sites More sharing options...
masterfisho7 Posted September 22, 2022 Share Posted September 22, 2022 Unreal report love the photos and the article top stuff Link to comment Share on other sites More sharing options...
Isaac Ct Posted September 22, 2022 Share Posted September 22, 2022 Great write up mate, really informative and interesting to read. Thanks for sharing. Link to comment Share on other sites More sharing options...
fragmeister Posted September 22, 2022 Share Posted September 22, 2022 That is one comprehensive guide! Good effort Derek! Cheers Jim Link to comment Share on other sites More sharing options...
wazatherfisherman Posted September 22, 2022 Share Posted September 22, 2022 Yet another great article Derek, it should help entice a few fishers to have a go at our beloved Luderick. Great info on a species that many are a little unsure of but would like to have a go at! Link to comment Share on other sites More sharing options...
dajayjay Posted September 23, 2022 Share Posted September 23, 2022 Thanks @DerekD, very informative Link to comment Share on other sites More sharing options...
Little_Flatty Posted July 13 Share Posted July 13 Just thought I'd bump this thread with a couple of discoveries I've made in the past month. Depth Setting Convention has it that you should start around 1-2ft above the bottom. I have found that often I get my depth estimates quite horrendously wrong and have been experimenting with a better method of doing this. What I have settled upon is getting a bomb or star sinker that is heavy enough to sink your float completely. Then to this I tie 1-2ft of fishing line to the sinker and I put a loop on the other end. This contraption lives in my tackle bag. When I get to the spot I rig up, then attach the sinker/line unit to my hook and throw out the whole rig. If the float sinks, then your rig is set too shallow and you adjust accordingly. If it is floating flat on the water surface then the depth is set too deep and you need to shorten up a bit. When the float or indicator is behaving correctly then you're at the perfect depth. Bring it in, remove the line/sinker attachment and you're set. DIY strike indicators for fly fishing I have started making my own strike indicators with Derek's specified O-rings. I have tried Derek's method, New Zealand style indicators, the cheap foam indicators and more. They all have their pros and cons. The fibre-based ones need floatant and will eventually sink. The foam O-ring indicators in Derek's article are good if you swap out the O-rings for something finer, but can struggle with the rougher harbour waters. My biggest problem with the cheap foam O-ring indicators is that when I use a 2-fly rig, the extra weight can sink them. I've realised once I get the right O-rings, they are quite easy to make. I buy foam sheets from a discount shop and spend a bit of time with a metal ruler, stanley knife and slice up some small foam strips. The end result are custom-sized indicators. These ones are 1.5 inches in size, about three times the length of the factory made ones. I am intending to cut these to size to fit the conditions and flies I use. 4 1 Link to comment Share on other sites More sharing options...
XD351 Posted July 13 Share Posted July 13 You can make what is in course fishing terms called a plummet , it is essentially just a small pyramid sinker with some cork glued to the bottom. Idea is to feed the hook through the eyelet on the sinker and then bury the point of the hook in the cork , dump the rig in the water and adjust the stopper until the float just stands up. 4 Link to comment Share on other sites More sharing options...
Little_Flatty Posted July 13 Share Posted July 13 10 hours ago, XD351 said: You can make what is in course fishing terms called a plummet , it is essentially just a small pyramid sinker with some cork glued to the bottom. Idea is to feed the hook through the eyelet on the sinker and then bury the point of the hook in the cork , dump the rig in the water and adjust the stopper until the float just stands up. I like the cork idea Ian, it’s going to be incorporated into my depth finder contraption. Much easier than looping the hook to the line. 2 Link to comment Share on other sites More sharing options...
james Cutler Posted July 14 Share Posted July 14 I use two rods when I am fishing for Luderick. (Not being greedy) I have weed on one & a very small lure on the other. I have caught luderick on lures. Plenty of burley & scent on the lures. 1 Link to comment Share on other sites More sharing options...
Green Hornet Posted July 14 Share Posted July 14 2 hours ago, james Cutler said: I use two rods when I am fishing for Luderick. (Not being greedy) I have weed on one & a very small lure on the other. I have caught luderick on lures. Plenty of burley & scent on the lures. Can’t say I’ve ever targeted blackfish using them, but have caught a stack on 3” bass minnows in watermelon pearl colour. 2 Link to comment Share on other sites More sharing options...
Green Hornet Posted July 14 Share Posted July 14 With flies I’ve found I get better results fishing them higher off the bottom than I do with weed. If the water is clear enough I try to fish them around 1 metre up. I feel the fish are sitting low out of the current and rise quickly to take the fly, giving them less time muck around resulting in a better bite. It also lowers the chance of the fly being taken by fish rising through the water column, the ones that when using weed make your float rise and lay flat on the surface. Those bites are almost impossible to detect using fly gear and an indicator. 3 Link to comment Share on other sites More sharing options...
Little_Flatty Posted July 14 Share Posted July 14 7 hours ago, Green Hornet said: With flies I’ve found I get better results fishing them higher off the bottom than I do with weed. If the water is clear enough I try to fish them around 1 metre up. I feel the fish are sitting low out of the current and rise quickly to take the fly, giving them less time muck around resulting in a better bite. It also lowers the chance of the fly being taken by fish rising through the water column, the ones that when using weed make your float rise and lay flat on the surface. Those bites are almost impossible to detect using fly gear and an indicator. Cheers Pete, I just dug out my dizzy scent this afternoon. Was worried I'd lost it and would need to buy more, but luckily I found it. Past couple of mornings the fish have been very cagey and whilst I've had a couple of downs, they were just too fast for me in rejecting the fly. Hopefully it will give me the edge I need. I will try setting the fly a little higher as well. 2 Link to comment Share on other sites More sharing options...
sashkello Posted July 15 Share Posted July 15 Great advice above! I'm a beginner at blackfishing, but in my past 3 outings I had no trouble bagging out in about 3-4 hours (in under 2 hours once), and have never had a 0 session yet... The main thing is to get to a spot where blackfish is. If it's not there no finesse will help. If it is there, then everything else is kind of optional... I caught my first few blackfish on a 7.2ft rod. There is absolutely no point in a long rod when you fish off a breakwall or rocks which drop off to some depth right under your feet. I remember I fished next to two guys with those long 12ft rods and I was pulling one fish after another literally half a meter from the edge, from their burley trail coming towards me, while they tried to throw their bait as far as possible. Luderick hangs near the rocks where they look for weed or tiny crustaceans to get washed off. I find the long rod advice quite questionable. I've been using my 9ft Catana rod with ordinary cheap spinning reel as dedicated blackfishing rod and it has been perfect for the task. Another thing people say regarding long bendy rods is that it helps to set the hook properly without tearing it out. But I've never had that problem. Indeed, luderick has relatively soft mouth and at first I did tear a mouth of one or two fishes (never lost one on strike though). Just don't strike hard. I literally don't strike at all, just start reeling in with a moderately gentle lift, that's absolutely enough for a good sharp hook. Use soft hands, let your rod go down with the strong runs a bit, don't muscle it. Downsizing my hooks and waiting for 2-3 seconds after a bite were the two things which immediately improved hookup rate for me, and now if it's a genuine down, rarely I lose a fish. Link to comment Share on other sites More sharing options...
sashkello Posted July 15 Share Posted July 15 Regarding the rig, Derek is very much on point with his advice, but I just wanted to add a few things so that you learn on my mistakes rather than your own. The bead above the float is important if the eye of the float isn't really tiny. What happens is that the rubbery non-slippery stopper gets little way through the loop of the float and gets stuck there, so when you start reeling in it slides with the float a bit down and you lose that perfect depth you've set up. If you're using braid, it's better to put sinker(s) below on a separate piece of heavy line between two swivels. Braid wears off by the sharp edges of the sinkers, and if that happens you lose your whole setup. I'd also advice to check how your braid looks before every outing, as sliding float does affect it as well, and I'd cut off a meter or so off the main line every 3-5 trips just to be safe, as it starts getting a bit hairy... That is also why you want to have a light (6-8pound) leader. You will occasionally hook the rocks and lose your hook. That is, it will be only hook if your leader is lighter than your mainline. It doesn't really matter what braid you use (mine is spooled with 20lb for other fishing I do with that rod), just make sure that the leader is well below that grading as it's not a huge sacrifice. Link to comment Share on other sites More sharing options...
sashkello Posted July 15 Share Posted July 15 Lastly, I'm becoming a big sceptic when people start talking about "natural presentation". Time after time I realize that it matters only for certain fish in certain circumstances, but at most times all that finesse is just something for the fisherman to be proud of rather than for the fish... People say that you need to put cabbage loosely on your hook so that it is all fluffed up and looks natural. But my hookup rate improved noticeably when I started doing the opposite - bunching / folding it up and squeezing around the hook, so that there are not much loose ends around. This way there is not much chance for the fish to not get hooked - just make sure the more fluffy part is around the barb and another side is not sticking out much. Otherwise there are lots of downs when they bite off the cabbage from the wrong side or the hook gets torn out without hooking the fish because it just is surrounded by cabbage. Look, if the fish is shy and you're wondering what else you can do, sure, finesse and try different things. But when you see that it's biting, it will bite whatever you present, the main problem becomes hooking it. 1 Link to comment Share on other sites More sharing options...
DerekD Posted July 15 Author Share Posted July 15 (edited) 1 hour ago, sashkello said: But my hookup rate improved noticeably when I started doing the opposite - bunching / folding it up and squeezing around the hook, so that there are not much loose ends around. This way there is not much chance for the fish to not get hooked - just make sure the more fluffy part is around the barb and another side is not sticking out much. Otherwise there are lots of downs when they bite off the cabbage from the wrong side or the hook gets torn out without hooking the fish because it just is surrounded by cabbage. Hi @sashkello, I came to the exact same conclusion over a decade ago, hence me talking about folding the weed into a bite sized morsel in my article above. I like and respect that you have thought your way through to this approach. Regards, Derek Edited July 15 by DerekD 1 Link to comment Share on other sites More sharing options...
TheFishyFisherman Posted July 30 Share Posted July 30 What tide is best for them? Link to comment Share on other sites More sharing options...
Burger Posted July 30 Share Posted July 30 11 hours ago, TheFishyFisherman said: What tide is best for them? It can vary with each spot! Some spots we fish up to high tide, others on run out to low tide. Best to have some run in the water, so your bait can drift an area. 2 Link to comment Share on other sites More sharing options...
sashkello Posted July 30 Share Posted July 30 12 hours ago, TheFishyFisherman said: What tide is best for them? At breakwalls (and I assume jetties) where you go straight down to 2m+ drop, it doesn't seem to matter. At shallower spots fish with incoming tide and around high. If you see cabbage bitten off to roots, it means they come at high tide to that spot when it's underwater and pinch it off. So use this knowledge. Link to comment Share on other sites More sharing options...
TheFishyFisherman Posted July 31 Share Posted July 31 Ok thanks for the information Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now