Jump to content

rickmarlin62

GOLD MEMBER
  • Posts

    3,914
  • Joined

  • Last visited

  • Days Won

    100

Posts posted by rickmarlin62

  1. the sand will be jamming in rotor under spool..i don't know how it would ingress into a sealed system such as stradic  in the short amount of time he describes it should only need a good clean down..i pulled an abu 6500c off bottom in Swansea channel..had been there couple of days..cleaned it up serviced it..still using it..it has no sealing  just openings for crap to get in...rick

  2. ive used wd40 for thirty years never had a drama..i don't know why people bag it it..i mentioned washing down the outside of the reel and spool  it washes away salt ..I think stradics have a waterproof gearcase if im not mistaken...the sand under spool and in rotor once washed away may be all that's needed..a blow by blow on how to take apart a stradic would take forever..have you dismantled reels before..do you have appropriate tools.oils.grease...the anti reverse systems can be finicky and if you aren't careful you may put pieces in upside down or not in order...if not sure of capabilities take to a reputable tackle shop and have it stripped and relubed by them...rick

  3. look up  spider hitch knot  tie one 6 inches down in 5 ft of line cut one leg 10/12 inches long  then tie another 2 ft down then cut that leg 10/12inches long then tie sinker at what length you desire..swivel tied to top 6/8 inch section ..instant dropper/paternoster rig....the spider hitch is a basic knot for creating doubles...rick

×
×
  • Create New...