squidboy

4.5 top ender Yammi four stroke 60hp, 32 knots

Cheers! Back on the water to test soon!

I was lucky enough to buy a Humminbird 798cisi some years ago (Excellent product). Since then I sold my boat and my boat dealer fitted my sounder on a Quintrex Top Ender 450. Since my new boat purchase I have had some transducer problems with the mount popping off or snapping. off This could be because the transducer has not been set up correctly as I have not been in water with much debris. I have had this happen three times on three different settings. Just wondering whether anyone has the same boat and sounder so I could share how their transducer is setup. It might even be the same on Humminbird and Quintrex boats in general. I would like the sounder to work properly sounding the bottom at speed and not breaking off. Another aspect I thought of was how much the boat raises to the plane, could this could also be a factor on my issue. Any help would be appreciated. I have a few photos below of how it was set up: Cheers Squidboy

Boat, car and fishing licence as one.

I am a little confused. If the bag limit is 10 and possession is 20. That means when i am on the water I can have 10 say silver bream, and 10 silver bream in the freezer at home malking the total in posssesion 20?

What you will find is the tank leaks at the top, underneath the hull. I had the exact problem because the tank was not fitted flush with the hull. What you can do is run a bead of silicone under your hull at the top of you tank. This is where your tank is mounted to the underside of you hull. You won't have any leaks after this I can assure you. Cheers

Best!

I think that's what the new aluminum I-beam trailers try to achieve. Although the bolt on bits are made out of galvanize, they are pretty easy to wash and change

Ok sounds good, but what would the effects of the solvent do to two stroke premixed fuels, if any?

I have been here the same week and been on two fish a session on sunrise. It has been tough. Some fish were between 45 and 50cm. But you are spot in tough tough tough week.

What is fuel stabilizer made of?

Great work Andrew. Congratulations on a great experience.

Maybe it's just me, but a fish thrashing these clips around could unclip the lure?

15kg cause if it's a rat and you loose it so what, if it's a hoodlum your in set match for some pain lol

I think it's an amberjack

I'm ver sure it's a platinum 'slug go' either the seven or nine inch.

Got a first start and have had it for 9 years, has not missed a beat

That is my exact combo, handles kings like a dream. I have caught meter plus kings and its gone for the job. 15kg drag and I have had it up to 18kg

How are they sorting it out? Is it a replacement or a repair?

Any photos?

Second hand quintrex top ender is a good start. Fits three very comfortable, can get a 60hp on and 4.5m boat. Good for the river, good for the harbour and can get you outside too. Sent from my iPad using Tapatalk - now Free

2500 is perfect

Just a thought but at what level and what oil has been out in this engine? Too much oil could be doing this

This story brings a new meaning to catch of the month.

I got the yammi, cannot complain