Smobaby

Good on you lucky he had an experienced boaty to help must have been embarrassed

Poor boat don’t cut corners not a v8 supercar

Congratulations must have been amazing moment tried on Sunday for all zeros weather turned foul headed home try again soon hopefully lucky as you

Great report nice feed marlin north and south of Sydney the water has been shitty for weeks you picked the day had same problem with bolts pulling through the ply on similar style seats changed to Relax helm chair much better

Very nice considering the conditions we have experienced where they on weed or cabbage water must be full of debris

Presume I’m dealing with the same crew his name is Steve very helpfull the motor is mounted about 50 mm above transom will ring and ask some more questions running solas prop first was a different brand supplied hopefully sort it out

What motor are you running have a similar problem boat is a streaker 585 with a bf150 Honda was recommended 14/1/2 dia 17 pitch over revs say 6300 then sent a 14/3/4 dia 19 pitch now only get 5300 rpm motor is full reco had the same problem with a hole seller need to contact prop provider to find if a 18 pitch available has been a drama

Here's what I make 75 dis 330 long work perfect for slimiest 750GPH pump

Just a thoughtful reminder out of date flares are illegal to have on board your vessel fines of $100 each flare will be issued. Expired explosives are illegal. Only know this because was pulled up by water police for a safety check and asked the question.

Make sure you clean the commutator as they wear out and build up with excess carbon from the brushes making it ark out overheat and stop working.This is done by scraping between the copper positives on commutator this will help with the reco

Heaps of bass tench reserve area and up towards your area

Good on you great outcome live bait wins every time worth the hard work

Great effort top fish

The only way to check is to look through the carburettor and make sure the throttle butterfly is fullly horizontal. You can do this by turning the throttle to maximum throttle then remove an cover at the carburettor inlet opening look through and make sure butterfly is perfectly horizontal. If not then an adjustment is required. Possible by cable or linkage make sure there no broken or missing rollers in linkage or cable could be stretched.

Good on you for having a go nowadays everything is replaced as a unit. If you can rebuild it if parts are available save you heaps bit of old school elbow grease

Congratulations put that one in the photo album at the top for now

Love the commitment you are a true fisherman with results to prove it

Another one is bread crumbs or two minute noodles you’ll be surprised providing its a clear type trap for poddies

Looks lie bail arm has jumped over the stop. Pull the bail arm off have a look stop might be worn out

Know your pain Montague island and Port Kembla islands they love 1metre kings as well they all have to eat.

Has anyone used this in saltwater. Looks the goods but big outlay seems like cheating what are your thoughts

Externally would be you ideal option but there is nothing to take the weight fixings would be in sheer on an aluminium transom could cause problems. Don’t be afraid to drill holes into your hull done correctly with the right fittings and sika no problems. Keep your bait tank as low as possible this will help with the handling of your boat remember weight distribution is very important your boat looks pretty heavy at the rear already with full fuel and battery. Depending on capacity do a trial with it full and move it to different locations before cutting holes for drainage spend the time it will be worth it cheers David.

To achieve what you want which is ideal, you need to connect to the transom coming, you will need custom fabricated mounts bolted through. The method would allow freedom of a removable bait board and extra rod holders at the transom.

Penrite gear oil will be fine they manufacture for the big boys just re labeled with a different price tag.

Looks good. Be sure to remove any burs from the cuts as these will cut through very quickly with movement. But super easy to replace less cumbersome than plastic *C* clips.